Roady Posted January 4, 2018 Posted January 4, 2018 (edited) I have a used 240z twin exhaust system which runs into a single muffler tip. (Photos attached). Inner diameter = approx 1.8" (each pipe - used a vernier caliper but it was at the end where the section is welded) Outer diameter = approx 2" (each pipe) Muffler/tail pipe inner diameter = 2.5" It has had a scrape where it bottomed out on speed humps several times, however no holes or anything that I can see that's actually wrong with it accept the aesthetic scrap. (See photos) The system connects to a generic extractor set (which I can supply also free of charge) however I do not have a photo of it at this time but can supply photos there is any interest in this post. $75 Can assist with delivery anywhere between Newcastle and Sydney for a cold refreshment. PM me if interested Cheers Edited January 4, 2018 by Roady gav240z 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.