Wtb: 240Z Park Lights/indicators

[andyk_79]

As per topic, checking if anyone has a set of these in good condition before I order the repro ones from MSA.  Mine are cracked, broken and generally shagged.

[gav240z]

Lens or housing?

[andyk_79]

looking for whole assembly if possible - lenses cracked and mounting tabs for the lights damaged. Looks like someone has done me the favour of glueing them as well.  Thinking I will replace the lot for rego etc and see if I can do anything with the old ones once time allows.

[gav240z]

26125-E4500

26120-E4500

 

Expect to pay up to $800-$900 AU for NOS.

 

So reproduction might not be a bad idea...

[andyk_79]

Yep I thought it would be a long shot !!

 

For those interested these are what MSA has:

 

http://www.thezstore.com/page/TZS/PROD/classic10d09/33-1122

 

On the surface of it they appear to be a reasonable reproduction

[gav240z]

Considering they come with loom, housing and lens with fasteners and gaskets. I think it's a very reasonably priced reproduction and it looks accurate also. If you do order them be sure to give us feedback on what you think.

[andyk_79]

Just found this thread again. The lights are reasonable but not perfect. Fitment is off on one side, but that could well be a fault in the front air dam and not the lights. Gaskets are a little chunkier than what I would like and I had to extend the wiring on one side to reach. Functionally good. Found this thread again when I was trying to find if my front parkers/indicators should have amber or whit globes. I was sure that I had seen they were white from factory which was what I fitted. Told the blue slip inspector this also but questioning myself now.