Jump to content

Recommended Posts

Posted

$220-00 plus pstge or local pick up sydney area.

  Brand new front & rear King springs to suit all S30 260Z cars but not 2+2 models as these are a lot heavier . As per "King springs  technical dept.

  Previously advertised ,but as there was confusion with what models they suited I have chosen to re list them with correct info.

 

      Front:    KDFL-04 rated at 175 Lb    Rear:  KDRS-09 rated at 175 Lb also  Lower by 30MM

 

NB. The 70-79 for the 260Z listing in their brochure was a typing error, also the KDRS-09 listing in the 240Z is correct. The Tech guy stated that as the 240Z was lighter the car remained at standard height when fitted with this particular spring. 

  Hope this clears up any confusion

                                                                                      Regards; Alan. Mob# 0405 291 467                               

Posted

Hi Alan,

 

I take it that these are both 30mm lower (front and rear) - do they need to be wired into the seats?

 

Any assistance appreaciated !

Posted

 

 

  G'day Pauly, no mate they dont require wiring . The Tech guy said that they are a standard size specifically for 260Z vehicles excepting 2+2 model.

However the KDRS-09 also fit  240Z rears but do not lower it as it is a lghtr car in comparison to the 260Z .

 

                                                                  Regards: Alan.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...