too_much_boost

Got a mechanical in Sydney http://www.viczcar.com/forum/index.php/topic,15012.0.html

The 2 sets of 4 bolt driveshafts sold. Still have a pair of 6 bolt ones

ANy offers on the mechanical diff?

4.3 diff sold. The rest is still available and open to offers

Send me a message if interested

I have a set of Rota RBX wheels for sale from an abandoned project New in Box 114.3x4 17x9 -13 (x2) 17x9.5 -19 (x2) No Tyres Located in Campbelltown, Sydney $950

Is this stuff priced correctly? Should I just chuck it on ebay?

I have for sale an long nose R200 mechanical LSD from a JDM HR31 Very tight centre. Has been inspected and set by a diff shop. Ratio is 3.7. Currently in a housing with ABS sensor on it $1500 Also have a long nose R200 viscous LSD. Ratio is 4.375 $900 I have 3 pairs of half shafts from HR31 to suit the above diffs $300 per pair Suitable applications 240z, 260z, 280zx, hr31, z31 etc

Hi All Ive got a couple of Long nose LSD's left over from my abandoned project and was wondering if anyone could help me identify them and determine what they may be worth First one is 4.375 ratio. Previous guy told me it was Viscous LSD Second one is 3.7. Its definately mechanical Ive also got a few sets of matching halfshafts with CVs from HR31 I never see these for sale so its hard to determine their value. All ive seen recently is an unidentified one sell for 1500 on ebay Ive attached the pics of the guts of both Thanks for any help offered

Dash SOLD

Coilovers sold

Bonnet SOLD

I didn't mention anything about camber plates or aftermarket hubs * Coilover kit with Tokico Illumina adjustable struts, King springs and adjustable spring lands. All brand new. Come with hubs and lower control arms too $1400 for the 4 Stock hubs, stock lower control arms. Yes they are assembled. Were for a 240z initially

Rear brake gear sold

Ive got someone looking at it tomorrow morning from gumtree. I'll let you know if that falls through

Pickup preferred. I don't have time to take this to a depot

The rear disk is made of R31 parts

Hi. Moving on from my Zed project so have the following parts available suit 260z * Coilover kit with Tokico Illumina adjustable struts, King springs and adjustable spring lands. All brand new. Come with hubs and lower control arms too $1400 for the 4 * Dash with cap suit 260z $250 * White bonnet with vents. Looks straight but small amount of rust along the sides $200 * Fender flares - fibreglass - Topstage i think - $250 for set (4) * Rota RBX wheels new in box - 17x9 - 13 front, 17x9.5 -19 rear $1000 * Pair of HR31 halfshafts $250 * Full rear disk conversion including modified backing plates $250 Also i have 2 complete HR31 LSD diff/shafts combos. One 3.7 ratio and one 4.3 ratio. Need to research going rate on these All parts located in Campbelltown, Sydney

Thinking about getting rid of my 1976 260z 2+2. Doesn't look like i'll have any time to do work on it being a single dad Not Registered Details 1975 260z 2+2. Pretty much complete minus motor. Comes with RB25 loom and stock ECU Been sitting in a garage for around 8 years before I bought it Is set up for RB turbo motor (20/25/30) Comes with RB20 gearbox with Zed mount 3 in mandrel bent exhaust Engine mounts for RB engine Custom tailshaft suit RB Alloy Radiator suit RB Big custom fmic Surge Tank and efi pump under boot R200 diff Lowered springs Straight shell. Great condition for its age (and compared to most zeds) No major rust (Several minor bits but nothing too tricky - worst is around the fuel flap) Attached is a few pics of what it looked like when i got it. I've removed the front panels and ground back a couple of the rust areas but its essentially the same Doesn't come with motor in pic, thats sold SOLD Located Campbelltown, Sydney

How about Z31 stuff? What other options do i have?

Hi Guys I'm looking for an LSD for my 260z. There seem to be alot of options and i'm open to all. The car will have 250+rwkw so i'll need something strong, but it also needs to be 'engineer-able' so can't require too many modifications to make it fit. Who has something i can buy without spending a pile of money? Cheers

you really need to update this thread....

What series skyline was this from? any idea of km?

Shipping will be a big factor for these kits. Can you give an idea of shipping costs to various capital cities?

I told my engineer that I was going to use R31 rears due to simplicity and availability and he was happy with that.