micks280zx

How much for the R200 Diff driveshaft flange? (The flange on the diff that is connected to the pinion gear)

MORE PICS

MORE INFO AND PICS SEE THIS THRED http://www.viczcar.com/forum/index.php/topic,3082.0.html

What i did with mine was. I used the std 280zx control arm and drag link. But you will have to work somthing out with the tie rod ends. There a tad bit short. I got S13 rose joints and made a adaptor from that to the rack end. Other wise its a stright bolt in. Here are some old photos my camera shat it self today. What you will see is S13 4 stud disk with a z32 caliper. Don't do this the caliper hangs 1/2 way off the disk. You might be able to use a larger disk with the 4 stud patturn. but i don't know what off. i just got my self a S13 brake adaptor see here... ( http://cgi.ebay.com/ebaymotors/S13-S14-240SX-Caliper-Brake-Upgrade-300ZX-Z32-12-75_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQhashZitem2ea3835f3dQQitemZ200311791421QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories ) and put on S14 hubs (There 5 stud 114.3 x 5) and put on 350Z disks (12.75" wide ones. NOT BREMBO) with the z32 calipers. I also used a S14 master cylinder (Becarful the front and rear lines are arse about to the std 280zx one) with a 1983 280zx brake booster. I am trying to find a rear end of a S2 (1982 - 83) so i can do a rear 5 stud convert with a z32 rear calipers and Z31 disks. So that so be sweet.

YES they will. I have done this mod. The only bad point is that the ball joint is at a 45' angle so you can't lower it too much. I should have some pics this arvo if you like.

I have done this mod to my 280zx. I have used the std 280zx control arm S13 wheel hub with a s14 stud patturn 350Z rotor and a Z32 4 spot front calipers. If you like i can post up some pics of that if you like. Mick

Hey guys, i am after a 280zx S2 rear diff assembly ie... rear diff (R200), arms, brakes, rotors, CV joints (CV type R200) and a Hood. Or if anyone just has a car that they want to get rid of just throw me a PM here on the forum. Cheers Guys Mick

Hey guys is am after a 280zx s2 (1982 --> ) rear diff, arms, brakes and hood. I am in WAGGA WAGGA but do trips to NEWCASTLE. Or if you have a full car for sale. I will take that too. PM me here Cheers Mick