OZ001

What's the size for the piping?

I don't have one of these due to running a braided line. Require one asap does not need to be perfect, I need it as a template to make a new one. Cheers

PMd

I'll take it, you in Sydney?

Need to source out a pin with the nut and dome nut. Used or new, I don't mind. Sydney preferred for instant pick up or will pay express post to get it here asap

If you're in Sydney, I got a used one. Used 100km before I converted it to carb. Free, if you want it

After 2 nights and some actual sleep. I found out my mate manage to squeeze the spigot bush onto the fly wheel thinking it was like other fly wheels and spigot bearings. Thanks for your help guys. With bearing carriers, what are the symptoms when putting in the wrong one?

Everything is lined up properl, it just won't go mate the block. We tried running in with bolts but as soon as you tighten up one bolt the otherside separates further. Spigot bush installed. No spring tension Bearing collar? Thought all L28 boxes were the same

I just spent 2 days trying to figure why the gearbox won't fully mate to the L28? I bought the right items to do the conversion. 240mm fly wheel 240mm HD clutch Pedals Etc The confusing part is everytime I try to ram the gearbox home, it leaves about 20mm . Anyone had this kind of issue when doing the auto to manual conversion? Urgently need help on this one. I can't remember how many times I've taken the gear box off.

do you still have the strut tubes/hubs from the 280zx?

interested, send pics please

required: out of a 280zx is preferred pedal box gearbox fly wheel tail shaft? master and slave cylinder sydney preferred or willing to pay shipping for the right price

Anyone got a manual 280zx? Going back to a zed after trying other cars

Thanks guys, will do

Anyone got a set of the lines that run underneath the car from the front to the back? Accidently cut one of the brake lines running along the car... Long story... Sydney preferred as I can pick it up but interstate is also fine