MelZ

Hi , have any of you guys used any of the fuel tank rust repair kits on the market?.there is an American product called "por 15"I think which seems to be readily available and can fix/ neutralise rusty tanks, has anyone used it or can recommend any other product.i have rust problems and now I have cleaned out all the rust have small perforation leaks. Thanks for any help. Mel

Thanks, but would rather keep it all standard in the engine compartment, so am after a fuel pump kit if possible. So who is the best source in Australia ?. Thanks mel

After investigation I have found the fuel pump is not delivering enough fuel so starving the carbs. I am finding it difficult to obtain a kit for the original pump, do you guys have any reliable/ good sources in Australia? Thanks mel

Thanks guys, yes I was talking to some other guys and they also suggested the non vented fuel tank but am not totally convinced as this is anew problem that has developed.The problem is that I only drive the car about 10 times a year , never in the rain etc.i have had fuel issues in the past and had changed fuel filters etc, blown out lines and float bowls so might be bit of trial and error.Also no fun being stranded on the side of the road miles from anywhere with just a screwdriver and crescent for company but that's part of the fun of a 40 year old car right. Mel

Thanks,yes I was put onto performance wheels by mag shop here in Nz ,emailed them but no reply.would be more than happy to buy off one of you guys as long as condition and figment is good so if you can post or send me some pics with your price I,m sure we can do deal. Either post here or email me at work mel@bayswatervehicles.co.nz.thanks for your help, really appreciate it. Mel

Hi guys,does anyone know where I can buy some centre caps x4 for my "magnum jelly bean style" wheels.They are 60mm diameter holes.Just the normal plain push through style is what I,m after. Thanks Mel

Hi guys,I have a standard 71 240z with twin hitachis on it.after driving it hard after about 20 mins it runs rough and then loses power, after sitting at the side of the road for about 10 mins I can restart and am away again----- is this classic vapor lock?-- it has the standard return pipes that circulate the fuel from the pump to them carbs then back to the tank which I thought was to alleviate this.When I stop and hold the pipes they are pretty hot which you would expect as bracket is bolted to inlet manifold but how hot does the fuel need to get to vaporize ?. Appreciate any thoughts ,thanks. Mel

Thanks guys , I think I will go for the Pertronix, a 280 zx is $250nz here and I can do the other option for half that, also I want to keep the stock look. I don't have any problems at the moment I just looking for smoother running during warm up etc. Last question is any supplier better than the others or is it just wether they ship to NZ , I see the shipping costs vary greatly. Thanks Mel

Hi guys,have any of you guys used the Pertronic electronic ignition conversion kit and what are your thoughts and experiences of it.Also do you have to change coils or not ,or can I still use my standard ballast system with good results .Lastly can you buy in Australia or do I have to import from the States , I see I can buy one from about $75 us plus postage whereas here in Nz the strokers asking in excess of $200 nz. Thanks Mel

Hi guys,I am currently running standard 14" jelly bean alloys on my 71 240z and am looking to change to some mini lite copies with the option of either 15x 7' or 15x8 's or staggered figment with 15x7's on the front and 15x8's on the rear.Have any of you guys run any of these options and which is best.I guess the staggered figment is best to neutralize any oversteer or rear end step out under hard cornering , am I right ?.your thoughts and experiences please. Mel

Hi Guys, can any one shed any light on this little problem.When my car (71 240z standard everything) is hot it is really hard to engage 1st or reverse, ie graunching.What is growing when hot so that the engine is not completely disengaged when i,m pushing the clutch in.Thanks for any help/advice you can offer.Mel Z

Hi all - am on the lookout for an original 240z 1971 radio (am only) for my husband's birthday in 3weeks time - am hoping to spend up to $200 for a 'minter!' If any one had one tucked away they don't want that'd be great!! thanks for any help ...tis one of the last things he needs for his Z ....

hey did you have any luck with your enquiry? I am also searching for an original 1971 240z radio....so if you've bought one and had any other leads to follow...that'd be great thanks

Hi Guys, i'm after the little short likage that goes from the rod off the firewall down to the throttle shafts.I think someone has called it the "j" linkage, its only about 100mm long like a little hockey stick. If anyone can help it would be much appreciated. Thanks Mel

Hey Pauly - I'm also looking for just the 'j rod' for my 1971 240z - have you had any luck as yet -would appreciate if you have any contacts (once you've got yours of course!) cheerz Mel