mars_240

Make an offer for any of these items. I will donate money back to site as I just want to clear my shed (for more parts!) most If not all of the parts are 260z. dash - terrible condition centre console - Snapped after ash tray back seat - black with a clean up good condition / no rips. 260z 2+2 doors both passenger and drivers - passenger has glass and all working mechanisms / driver has no glass but mechanisms radiators - not sure what they are out of I think one is a R30 skyline.... 260z gauges and wiring loom door cards 2+2 - passenger is poor condition Drivers & passenger door pull. headlights pick up from Gembrook Vic or Mulgrave (business hours) cheers Marcus

Hi all, I am chasing down a couple of items that have gone MIA during my re-build (many more have gone missing but got around them so far!) I am chasing down the bracket that fixes to the metal section above the front window that the rear vision mirror fixes too. I hope you know what I am on about! The other item is the nuts for the windscreen wipers. Cheers Marcus

Hey guys, I am chasing down 260z 2 seater passenger and drivers side glass (incl. runner attachment - not sure what you call this section the glass fixes to). I also require the internal door latches (part to open the door) again for both sides. Cheers Marcus.

I went to Clark Rubber - they have a whole range of sizes (Supercheap only had the smaller grommets) including the large 45mm odd size for the floor pan for anyone who needs them.

Thanks Jeff, I'll give them a go. Marcus

Hey guys - chasing down where people purchase the rubber grommets for the floor pan, spare wheel, hatch etc. I have been told America but they want over $160 for postage to send me 8 grommets! Got to be a better place to purchase these from. any help appreciated! Marcus.

Hi Peter, I am chasing the section - centre of the fire wall. I seemed to have found the bracket but the piece I have from the fire wall to the carb seems sort but I seem to remember it had a join...?

Hi Guys, I am chasing down a section of the throttle linkage for a set of SU carbs for my 240. I am missing the piece that fixes to the fire wall (to change direction) and I think the rod to the carbs. Hope you can help! Cheers Marcus.

Hi Guys, I have a set of 260Z tail lights I would like to get rid of out of the shed to make more room - they are damaged around the outer casing. I thought they might be alright for a race or rally car. Pick up only from Gembrook or Mulgrave (during business hours) Let me know if you are interested. Marcus.

PM Sent.

Hey mate, how much do you want for the radiator? Marcus.

Hey mate, I bought that sway bar off you! What a pain you have to sell it.... it is such a nice car, and almost done. Good luck with the sale. marcus.

Hi guys, I did a garage clean out over the weekend and have a small number of parts, let me you if your keen: - 260z tail lights (both sides) but drivers side is plastic has been damaged (can send photo) - 260z heater control panel - 260z flat top twin carbs with manifold (seperated from manifold) - 260z instrument cluster (speedo, tacho, oil, water etc & clock) - 260z 2+2 rear suspension with drum brakes. - 260z 2+2 quarter windows (both sides) - 260z 2+2 Chrome strips that clip to the gutters (both sides) - 260z metal windscreen demister cover. Let me know if your interested in any of the above items - you can contact me on 0417 779 055. Cheers Marcus.

Yeh mate still have the gearbox, PM me if you are interested. MR.

Nah sorry no pedals.

Sorry no more master cylinder. Not sure about the control arms I think I have a set of 280zx ones if they are the same?

Hey guys, Garage clean out time! I have the following bits - 280ZX brake booster and master cylinders. - 280zx instrument cluster - I also have the middle dials also. - 260Z front indicator and parker lights - Rear disk brake calipers - Rear disc brake adaptors - have filled ready to be re-drilled to suit stud locations - Rear 260z 2+2 suspension arms including standard struts. - 260Z front cross member inlcuding steering rack. - 280zx manual gearbox. PM or call if interested - 0417 779 055. Parts located can be located in Woodend or Melbourne. Cheers Marcus Let me know of your interest - Marcus

Hey guys, Need this gone to make space, can bring the motor back to Melb (northcote) if required - when the motor was removed from the car it had done 61,000 Km's. Let me know ASAP on 0417 779 055 before I put it on ebay. Cheers Marcus.

Hi mate, I have a 280zx box that I wish to get rid of PM me if you are intested, box is located in Northcote. Cheers Marcus.

Thanks that would be good.

Hi guys, I need a gearbox rubber mount for a 240z not sure if they are different from a 260z but I am after the mount that has a single fixing to the steel mount, hope this makes sense. Cheers Marcus.

Hey guys, I have a L28 motor with the standard injection that I do not require anymore, it came out of a 280zx that I wreaked about 6 years ago and was running at the time. I have the computer and all wiring associated. $500. Pick up from Woodend. Cheers Marcus - 0417 775 055.

Hey mate I have a complete L28 with Manifold and computer etc I was thinking of selling. LEt me know if you are interested. Cheers Marcus.

Hey mate, I think I do have one for you, as I have recently picked up an LSD for mine! Give me a call. Cheers Marcus.

Thanks for that, I was able to get my hands on some rust fee 260z 2 seater doors thinking that I may be able to use them on my 240z as my doors were rusted out, damn it. I think they are the later doors as they seem to have different mechanisms as to my original 240z doors.