Forged pistons for an L28

[Scando]

I'm after some forged pistons for my L28ET?  I don't need low compression pistons, just standard dished pistons as I'll be using a P90 head on this engine.  If anybody could recommend any companies that make them it would be great.

 

Thanks,

Shane

[C.A.R.]

Get in touch with this guy: http://www.northshoreperformance.com.au/

He sells CP, Wiseco & JP pistons. Cheapest in Aus.

[Scando]

Get in touch with this guy.

He sells CP, Wiseco & JP pistons. Cheapest in Aus.

 

Thanks Lurch but you didn't put the guys details

[C.A.R.]

[Scando]

Thanks heaps Lurch, I'll give them a try.

 

These guys can do them

www.serco.com.au

 

but it will take about 6 weeks to get them from the US and I need them a bit sooner than that 

[zr240]

Just a long shot but how different are the pistons in the RB 25/26/30 motors cause if you could use a forged piston(aftermarket as they are not forged std) from them it would probably be a bit cheaper??

 

Ash

[Scando]

I'm not too sure how much different they are?  somebody else on here might know.  I think the bore size of an L28 is similar to an RB26.  As for pin size, pin to crown height, etc I wouldn't have a clue.  One of my sponsors has kindly agreed to pay for the pistons and isn't too concerned about price.  Time is the only problem because the next round of the series is mid October and I need them here in time to get the engine built and run in!