Jump to content

Recommended Posts

Posted

hey all since doing a l28 upgrade in my 260z 2+2 my little red light is always on, it charges at only 12v or about 16v to 18v it fluctuates depending on alternators, if you disconnect the battery sometimes it dies other times it doesn't i have also changed my alternator but still does the same thing.. does any on know what may be causing this as it is really bugging me.

 

cheers pauly

  • Moderators
Posted

Are you running a ZX int reg alternator or a ext reg 260Z alternator? Seems like the regulator has shat itself..

Posted

i have tried both mind you the one that was installed on my l26 my spare now on the l28 was a internal regulated unit anyway and i had no issues so its got me stumped dimitri.

 

cheers pauly

  • 2 weeks later...
Posted

Did you bolt the old alternator on to the new motor?

 

What make/brand of alternator is it? Apart from the main battery wire (thick), how many other wires are there on the back of the alternator?

How many plugs/connections? Might pay to take some pics of both and upload.

 

Are your alternators different to one another ie. different brand?

 

12v tells me it isn't charging.

16-18v is WAY too high. It shouldn't normally go above about 14.4v.

 

Don't EVER disconnect the battery while the engine's running. The alternator uses it to sense/regulate voltage. You risk causing some ugly voltage spikes that might wreck any electronic devices on your car.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...