pauly_adams Posted May 10, 2006 Posted May 10, 2006 just wonderin what is the actual difference between the 260z carbies and 240z one and if the look any differnt Quote
Rod F Posted May 10, 2006 Posted May 10, 2006 Hi Pauly, Have a look at www.ztherapy.com they overhaul carbs in the US and have pictures outlining the differences. Not sure if all the changes appeared in Oz, but it should give you an idea what you're looking at. Quote
pauly_adams Posted May 11, 2006 Author Posted May 11, 2006 thanks for that i also forgot to mention would a single 2barrel carby be better then the double su's Quote
Natez Posted May 11, 2006 Posted May 11, 2006 IMO Su's are the go for a standerd, or mildly modded L series motor, don't bother with the single 2barrel, 280zx injection is better than that.... Quote
luke_mcmahon85 Posted May 12, 2006 Posted May 12, 2006 260 carbs were flat topped, while 240's came with round top carbs. the 260's have square mouths, while the 240's had round Quote
pauly_adams Posted May 13, 2006 Author Posted May 13, 2006 thanks for that also wondering will the single 2 barrel affect fuel econemy in a good or bad way Quote
lambs Posted May 13, 2006 Posted May 13, 2006 thanks for that also wondering will the single 2 barrel affect fuel econemy in a good or bad way 240Z carb's will give better fuel economy and overall performance. Theoretically the 2-barrel can be made to give good economy esp if it's a webber, but the manifold design is pretty crap and economy suffers. If you have a holley the situation will be worse as they are very crude carb's. Quote
pauly_adams Posted May 15, 2006 Author Posted May 15, 2006 thanks for that just what i wanted to hear soz bout askin some stupid questions but i just got my zd and its been fun finding new things in it like a set of carbies in the boot etc so thanks for all the help and i may ask another stupid question soon Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.