L28 flatop pistons for sale

[kalium]

Had these sitting around for a while. They are in good condition, no cracked ring lands or anything. $250.

Pickup availible around brisbane/gold coast

 

Cheers

[Mr240z]

Sorry to tell you Kalium but you can buy these brand new from Stewart Wilkins Motorsport for $244

 

http://www.swmotorsport.com.au/index.html?lang=en-us&target=d128_01.html&lmd=39067.093299

 

So you might want to try lowing your price or ebay them

[Glen]

Had these sitting around for a while. They are in good condition, no cracked ring lands or anything. $250.

Pickup availible around brisbane/gold coast

 

Cheers

 

Are they genuine nissan?

[kalium]

Sorry to tell you Kalium but you can buy these brand new from Stewart Wilkins Motorsport for $244

 

http://www.swmotorsport.com.au/index.html?lang=en-us&target=d128_01.html&lmd=39067.093299

 

So you might want to try lowing your price or ebay them

 

eeek! Thanks for the heads up! Yeah I may just put them on ebay then. Not in a huge rush to sell though.

[kalium]

Are they genuine nissan?

 

Certainly are

[zr240]

Yer I brought a new set of 6 with rings for $225.

 

I threw the old ones out and they were in similar condition to the ones your selling (sorry to put a downer on your ad)

 

I really wouldnt reccomend putting old pistons in a motor either

 

Sorry

 

Ash

[kalium]

Yeah I guess new is usually better, as long as the quality is good. Why are there major problems running used pistons in a new motor? As long as they haven't been abused in in a high power motor or suffered damage from pinging, and you get them at a size appropriate for the block. How come you didn't use the pistons you had ?

[260Coupe]

Yeah I guess new is usually better, as long as the quality is good. Why are there major problems running used pistons in a new motor? As long as they haven't been abused in in a high power motor or suffered damage from pinging, and you get them at a size appropriate for the block. How come you didn't use the pistons you had ?

 

All notable engine builders will advise that it is always best practice to go with brand new pistons rather than reuse old stock, L series piston always go oval with wear ....(i.e the skirt diameter will be less than the crown ) and the ring glands can wear so for a few hundred dollars it is cheap insurance to use fresh pistons.