Rat1314 Posted August 13, 2016 Posted August 13, 2016 As the title says I'm after a fuel injector from a turbo Z31. Pick up preferred but will pay for postage Quote
dat2kman Posted August 13, 2016 Posted August 13, 2016 Whats the cc rating, or, Bosch equivalent part number? Quote
Rat1314 Posted August 13, 2016 Author Posted August 13, 2016 It's a 260cc, the Bosch website comes up with a part number 62001 but it doesn't show the flow rate. The turbo and NA injectors have different flow rates Quote
dat2kman Posted August 13, 2016 Posted August 13, 2016 Cross check it with the very commn Bosch injector for the Holden VL Turbo, these were Nissan RB30 engined, fuel delivery could be very close to tye V6 Turbo? Quote
Rat1314 Posted August 13, 2016 Author Posted August 13, 2016 I believe the RB30ET and VG30ET injectors are the same. Being a weekend I can't get part numbers Quote
Rat1314 Posted August 15, 2016 Author Posted August 15, 2016 Bosch has them listed as discontinued Quote
260DET Posted August 15, 2016 Posted August 15, 2016 I have six from the VG30ET engine which came out of the '88 I'm turning into a race car, condition unknown. $200 for the 6 posted to Brisbane. Quote
pauly_adams Posted August 19, 2016 Posted August 19, 2016 use RB20det injectors and put hose on the end of them, use a EFI hose clamp either side and all will be fine. Rb20det, CA18, CA18det injectors are 280cc each and work fine Quote
Rat1314 Posted August 23, 2016 Author Posted August 23, 2016 I ended up getting some new injectors at a good price. RB30ET injectors are the same as the VG30ET ones Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.