Jump to content

Aussie260z

Members
  • Posts

    38
  • Joined

  • Last visited

Everything posted by Aussie260z

  1. It's good, the mounts and the gearbox crossmember are sold, anyone want a tailshaft :-)!
  2. Thankyou Mike, sorry, I should have made myself clearer! This tailshaft is from a coupe, will not just bolt into a 2+2, not long enough! I am in Canberra!
  3. Yes probably, had an offer on the mounts - but you sure this will suit your application mate?
  4. To much $$$ :-)? Open to offers fella's, this stuff is just taking up space and it would be good to make someone's life easier swapping an RB into the car instead of sitting in a box in my garage :-)!
  5. Hey guys, Selling some of my old gear - this is an RB conversion for a Z, They are Castlemaine Rod Shop mounts with reasonable engine mounts, offset gearbox crossmember and balanced tailshaft, all you need is a rear sump and your away! This gearbox crossmember uses the original Z engine mounts - 260z (won't work with the 240z!!!) and won't work with the bigger RB25 gearbox as it is a fat sucka! Will work with the RB20DET & RB30 N/A gearbox! After $420 for the lot! I will also throw in these other engine mounts I whipped up so I could use a bolt/bush style mount - however, you will need to modify your crossmember to use these engine mounts! I can be contacted on - 0403 836 526 or tonycharger72@hotmail.com
  6. Hey is some pics of the Lower Control Arms and TC/Radius Rods! Shown is a stock TC/Radius Rod for comparision - bushes are included!
  7. No worries, I will get some tomorrow and send you some pics!
  8. MIG welder is fine! Most of them are alluminium - you weld on a little bung and the threaded collar sits over the top of that, Thats how these ones work, http://www.ground-control-store.com/index.php & http://www.technotoytuning.com, TechnoToy sell GG gear, but there customer service is excellent! But it is all pretty straightforward stuff - cut of the spring perch, weld on the bung at a certain height (which TTT will give you) put on the collar, re-install into the car, Can even retain your stock rubber insulators if you like, The kit with spring hats from memory is about $500 US and something like $45US shipping, Grab some Z31 KYB 300zx inserts and some 150-170lb springs and your away! They are a 56mm OD tube, TTT, Ground-Control, Modern Motorsports, ArizonaZcar will all be able to help you out with that - just tell them you have a 280z!
  9. Hey guys, I am selling some adjustable TC/Radius Rods and Lower Control Arms to suit 240z/260z, I purchased them from Stewart Wilkins Motorsport about 3-4mths ago and never fitted them to my car - just sanded them and hit them with POR-15 Paint! The LCA's use a rubber bush and a welded bolt for adjustment, not rose-jointed, so a bit friendly for a street driven car and from memory allows 2-3deg's of camber adjustment! Same goes for the TC/Radius Rods - they are just longer than the stock units with more thread, which allows you to move the strut assembly forward, from memory again, these rods allow about 6 degree's of caster adjustment! I am looking for $400 for the lot, retails from SW for $481 or so! You can email me - tonycharger72@hotmail.com or 0403 836 526, Items are located in the ACT, but am more than happy to post at buyers expense!
  10. Hey mate, I am local, keek to come and have a look at the guards and bonnet mate - need a new bonnet :-)!!! Send me an email - tonycharger72@hotmail.com - to organise! Tony
  11. Aussie260z

    Cross Member

    Hey Guys, I am after a cross member to suit a 1970-78 240/260z and a Bonnet, prefer decent condition (vented or un-vented), I am in Canberra, PM me or send me an email if you have anything to suit, Tonycharger72@hotmail.com Tony
×
×
  • Create New...