datozed Posted September 15, 2011 Posted September 15, 2011 Can anyone tell me if a RB30 CAS disc fits a L28ET dizzy as I am wanting to run semi sequential or sequential fuel injection on L28 and need the home slot so ECU knows where No. 1 is? Thanks Quote
peter mc Posted September 15, 2011 Posted September 15, 2011 mate i make one that has a rb30 cas for full sec works a treat Quote
Moderators Zedman240® Posted September 15, 2011 Moderators Posted September 15, 2011 I just drilled a 1/8 hole near #1 hole and it works fine.. Quote
datozed Posted September 16, 2011 Author Posted September 16, 2011 i have a l28 turbo cas dissy and can get vl dissy cheap was hopeing i could just swap the disc, anyone done this thanks for the replys Quote
datozed Posted September 17, 2011 Author Posted September 17, 2011 Job done, all too easy. VL RB30 dizzy from wreckers $5, removed disc. L28ET dizzy with drive shaft from Ebay $99, removed disc. RB30 disk bolted straight in, no mods, everything lined up. IMPORTANT: Just make sure up is up. Both rotate counter clockwise. All you need is a screwdriver. Total cost $104, dont need to spend $600. Can now do Semi or full sequential inj, dizzy, Wasted spark or COP. Thanks for replys, hope this helps someone else Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.