Johan Posted April 10, 2016 Posted April 10, 2016 Cleaning the shed. No more need for the parts. Brisbane Redland Bay area. Open to any reasonable offers. Pickup prefferd. May package up for courier if offer is good. PM me please. 280z ECU check pics for part no: https://drive.google.com/open?id=1tAGJ3QLRbmp_5ORHDFUmKVIV172HF2WkIg https://drive.google.com/open?id=1YEct3M7fJyS0smfPc0wl0n80hrnJyfgkhw Alternator: https://drive.google.com/open?id=10uNpcCa7rRVkJ_QzcSOcC-_K8ZaHF12-HA https://drive.google.com/open?id=1cM6FOKtQJUAJGgmOlQVWJQBKpsrdWX1mkQ TPS: https://drive.google.com/open?id=1Ts0PZRUUp-8DQ8hHyPbPDgebAzksEJ4iFg Starter: https://drive.google.com/open?id=1nQO7cLH0gVM3e6WYnTSyLGJH_A9u8qH6qQ MAF: https://drive.google.com/open?id=1voz8MCalM5eW082fclfDY2kIQ7drxSlbKg https://drive.google.com/open?id=1Z66Z6WY5ojUU3c2V68XTaAWQHKVt_VK07w L28 and rare 3 speed auto. Came from a running 1982 Patrol removed running well 6 weeks ago (converted to Rb25DE NEO). Will separate L28 and gearbox. Believe the 3 speed auto is the same as 240z auto. The model plate is barely readable below. Lots of good parts on L28. Oil pan is not compatable with Z car because the low end is at the back. I believe you can swap with z oil pan if you redril the oil pick to the back blank and tap and plug the front. Motor used a little oil when pulled but no smoking and revs cleanly to the red line. Complete with ps pump, working aircon pump, alternator and 280z exhaust manifold. Carby and points. May part out only if I can sell most of the parts. Advertised elsewhere. https://drive.google.com/open?id=1sEth_fLuFMx-JeMHmwwxvHQi0MvZydn5vw https://drive.google.com/open?id=1SA0eeBm4P5B2L4V4UP4uPKBLTFP_gWJyOw https://drive.google.com/open?id=1MMElb7emzjsHQXugGji0NwqlsWOsD5OXBQ https://drive.google.com/open?id=1RpwgW3Wile3oYBF7BkBPeLmSSBKCewl14A https://drive.google.com/open?id=1vmSTljhh4jJojoDrIWo9eLruJI7VxRNzGg https://drive.google.com/open?id=14JgRWPNABPN0h5CUszriKZ-M2ogjbBJYhQ https://drive.google.com/open?id=1lddPal8A8R3LsBQxlq5LgAjrVrRuDIvL_Q https://drive.google.com/open?id=109RmbOfzztjyFJdWsTE5UOxaBA30DQehNQ https://drive.google.com/open?id=1nP2jY6mTzd0cMwo8plWCl9zBA9TkY-KhkQ https://drive.google.com/open?id=1weoYhCdgNAs6JmlL4IYbPm6zwJHiLZBi1g gearbox tag https://drive.google.com/open?id=1wx87nZNXedvm2KKcERYDEgxLWDA7gn3bSQ Quote
Johan Posted April 10, 2016 Author Posted April 10, 2016 N42 head recently refreshed. Turned out cracked block was to blame and not head. Removed from block after 1 hour. Straing with Nissan valves. https://drive.google.com/open?id=1HrJI5bLO13Xc_W0-mbjosCHH4fHYS0XVyw https://drive.google.com/open?id=1dPoqzdJZcMWaGv2hmgL9vT_JqDkJyD6dcA https://drive.google.com/open?id=10fZmFi4XAl0s51injAx6SjhUmbSJ5Tozcw https://drive.google.com/open?id=1qFHQBSQBaMhHEU1MyYI6M03ylHGxJxPR1g https://drive.google.com/open?id=1t8PI5oZPkiqPmvHPtK4f02T4Vke5fPpp9g https://drive.google.com/open?id=1PfqWPbuJoe0X8PXGrPutMotFOvDXtbnWFA Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.