injector setup values for Haltech E8, GTR 440cc yellow tops in L26

[dorifticon]

Hi all

 

Am trying to get the L26 started, is running a haltech E8, fuel and spark.  Have a couple of questions:

 

1) with 440cc GTR yellowtop injectors, what should the injector duration be (in milliseconds) at idle (say 1000rpm)?  Just need a ballpark to start with.

 

2) what should the startup timing be?  It's currently set at 10 deg BTDC on no.1.

 

Any help greatly appreciated.

 

Andrew

[nizm0zed]

I used a calculator i found on the Haltech forum.

It was desgined for the E6X but the fuel measurements should be pretty much the same across any system.

http://forums.haltech.com/viewtopic.php?f=11&t=1615&sid=a3dd75a9042f673c8919f3b24d02e5dd&start=60

(use the updated version near the end of page 5)

 

I also have my tune on another computer, i will endeavour to pull it and upload it somewhere you can have a look over it.

It was for a L28 Turbo, but you should be able to pull a decent bit of info out of it.

[dorifticon]

Thanks for that!

Andrew