Jump to content

HS30-00211


C.A.F.
 Share

Recommended Posts

  • 1 month later...
Posted (edited)

Gav calls me at the back half of 2020:
"I've just spoken to a guy in Sydney and he's just started the restoration on #211 - the panel guy he's using says the restoration is too big a job for him
and he asked me for a recommendation, so I forwarded your number onto him. Apparently it's got some serious rust issues."
"Thanks mate. I think..."

0ZgltdPvJCDd_r1w8DRt7Dp06QvSp8zxgGpUidpd 

The owner - Tony - calls me 15mins later, and he sounds pretty exasperated . The restoration has not started well...
He explains his panel guy in Sydney saw what came back from being blasted and decided it was too big of a job for him. (After seeing it myself, I can't blame him...)
After a long discussion with Tony, I manage to put his mind at ease that - with a serious budget - we can indeed restore it to factory condition and I organize to have the #211 transported down to me, with the caveat that we'll be starting the restoration early to mid '21 - no earlier. 

Ignoring the body 'issues', what arrived was a bit alarming.
While the matching numbers L24 was bolted in the engine bay (just), everything else was in the cabin! And only loosely boxed up...
And I quickly saw some parts were not original...

y1yUzS1YDD-XoW1irrh0U_J4cs4WA4Xkq5IQxCEd 

Into our storage facility it went, while it awaited it turn...

JIZ5dhHKTXOz9lV1fl5rXjx07IVKFE0IntD9NBlz 

Edited by C.A.F.
Link to comment
Share on other sites

Posted (edited)

The matching numbers L24 is being handed over to ‘L Gata Guru’ Les Collins in a few months for a complete rebuild along with the early 4 screw twin Hitachi’s which I dropped off to him today to start on.
The diff will be going off to LCR for a rebuild as well.

I wasn’t surprised when I saw the gearbox in the back of the Z – a 71B.
It should have an A box, and luckily I’ve come across a complete one with its tailshaft, so LCR is getting that to rebuild too.


The body has already been stripped of everything, media blasted and coated in Epoxy.

Some non-original parts have been found - which is mildly alarming - so we'll be on the hunt for original replacements.
Of more concern is the RH front - it's had a major accident in its life and the complete skirt and rail has been replaced with the terrible Oxy/Act welds to boot... 
It'll be getting new engine bay rails along with all new panels from KF Vintage (pictured above).

But the rest of the bodyshell and panels... oh boy... We've got our work cut out for us.
More to come…

lC7IcQwSBPzvJZHG28BwfAT5zLx7SScV86wXcXbb 

c2qf8iIEhrQd5zGLHhvwtcL_qc3fjKqNXajnr--B 

Edited by C.A.F.
Link to comment
Share on other sites

6 hours ago, AndBir said:

I think this "period correct" soundtrack as a background to the video /audio would nicely match how much "Lovin" 00211 is going to need https://youtu.be/xcxYX8KPhGk?t=4 .It is also almost the same length of the walk around video :-)

 

 

Love it. That’s what’s needed for the build.

Jeff

Link to comment
Share on other sites

  • Administrators

Just the right amount of wah wah pedal in that track... very sensual. :)

Link to comment
Share on other sites

  • 2 weeks later...
  • Administrators
13 hours ago, C.A.F. said:

Another progress video for all you cool cats and kittens:

https://photos.app.goo.gl/6ThtWMX1jsJAH7ABA 
 

4:30 - what if we only watch these videos, to see you play Glory Hole with #211? :D

 

 

Link to comment
Share on other sites

RH side of the roof is all welded and linished smooth:

RrRBNtjjtwOToQRcHV1yCk1OWu4qCAzd_qy8aLgx 
 
And the left hand side is welded in place too:

zFa2FPpkuVNDC5yP-XwvEQ1iPmN5Ef1K1quvv9tL 

I also removed the LH sill yesterday afternoon - there was nothing left of the end of the sill under the bad repairs that made up the dogleg...

3rs5Dt7szan3ZrJ_EKJGAdAFRqRZmJlxaoiUkn_k

Cu_0F7OVvLwvMQPj9eJzqcAntQZ1UBlSvyZxaxJl

ZUfnarq81kQc3BWBqdir9fbd84i7-fuHDVmw_Vx4

The inner sill has to come out too, as both ends are non-existent.
Lucky I have some funky green panels to replace all this...

Link to comment
Share on other sites

10 hours ago, C.A.F. said:

Lucky I have some funky green panels to replace all this...

Hopefully the civil unrest in Columbia does not worsen and disrupt manufacturing at KFvintagejdm.

I see they are hoping to have full rear quarter panels available around Aug/Sept. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...