peter t Posted September 3, 2020 Share Posted September 3, 2020 (edited) Hi I have a set of 2 inch JAG SU carbies equipped with K&N filters that are no longer required. They were done up just before I bought them and have had little use although have been sitting around quite some time. Looking for $500 plus frt or pick up Loganholme. Edited November 22, 2020 by peter t Quote Link to comment Share on other sites More sharing options...
theremm Posted September 3, 2020 Share Posted September 3, 2020 Do these offer a big performance difference over the smaller hitachi SUs? Quote Link to comment Share on other sites More sharing options...
peter t Posted September 5, 2020 Author Share Posted September 5, 2020 On 9/4/2020 at 8:48 AM, theremm said: Do these offer a big performance difference over the smaller hitachi SUs? Not sure mate. I only had them on the L26 for a short while. Maybe some one else has some knowledge as to what performance can be achieved with these. Quote Link to comment Share on other sites More sharing options...
24 Dat Posted September 5, 2020 Share Posted September 5, 2020 (edited) @theremm i have a set of 2" Hs8's (picture below)from at Rover 2000TC on one of my Z's they are virtually identical to the ones above, i have heard the Jag ones can be a little more difficult to set up. the N36 inlet manifold (in the picture above) are apparently the best flowing of the standard manifolds, Unfortunately i didn't get the car dynoed when i first put them on but i did notice a big improvement in the cars power. sorry no data The standard 1" 3/4 Su's on the Z's have and diameter of 44.45 mm the the 2" are 50 mm So basic maths (i did fail maths at school) pi r 2 the 2"Sus have a little over 25% more area to allow air in, More air and fuel in, and as long as it can get out will give you more power. If your in Brisbane I recommend you talk to Rob from Brisbane Turbo and Tuning for advice and getting him to set these up to get the most out of them. Edited September 5, 2020 by 24 Dat peter t, RAP260 and theremm 2 1 Quote Link to comment Share on other sites More sharing options...
peter t Posted October 17, 2020 Author Share Posted October 17, 2020 SOLD. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.