Wags Posted August 30, 2020 Author Share Posted August 30, 2020 Got some more photos from Locky of CAF. Check out these beautifully gapped panels! Bodywork is almost drawing to a close. Some beautiful work done to this shell thus far. looking on track, and in to paint when our guy is next available. AndBir, JDM-TOY, GongZ and 5 others 8 Quote Link to comment Share on other sites More sharing options...
lightmaster240z Posted August 30, 2020 Share Posted August 30, 2020 Nice wore there cant wait to see the next stage Quote Link to comment Share on other sites More sharing options...
Wags Posted September 5, 2020 Author Share Posted September 5, 2020 More pictures from the artists at LCR today. Engine almost complete and ready to go on the Dyno. The ATI balancer we ordered arrived and when that goes on we will kick it over. CBR Jeff, Ponyo240z, OdinZ and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Wags Posted September 8, 2020 Author Share Posted September 8, 2020 More pics from Les at LCR with the ATI balancer in. Ponyo240z, CBR Jeff and 240ZBUILTBYME 3 Quote Link to comment Share on other sites More sharing options...
Wags Posted September 8, 2020 Author Share Posted September 8, 2020 Couple of more update pics from Locky at CAF showing what, I think, is the most amazing angle of these cars...front on and low. Ponyo240z, OdinZ, JDM-TOY and 2 others 5 Quote Link to comment Share on other sites More sharing options...
Ponyo240z Posted September 8, 2020 Share Posted September 8, 2020 Looks brilliant Wags 1 Quote Link to comment Share on other sites More sharing options...
240ZBUILTBYME Posted September 24, 2020 Share Posted September 24, 2020 nice one Gary! very delicious build so far wags, you must be so excited. Really sucks not being anywhere near these amazing distinguished vendors, CAF, LCR, MCA etc ryan Wags 1 Quote Link to comment Share on other sites More sharing options...
Wags Posted September 26, 2020 Author Share Posted September 26, 2020 On 9/24/2020 at 11:15 PM, 240ZBUILTBYME said: nice one Gary! very delicious build so far wags, you must be so excited. Really sucks not being anywhere near these amazing distinguished vendors, CAF, LCR, MCA etc ryan Thanks mate! yes I am really excited. It’s in for paint now and the last of my huge new parts shipment is coming in. Very close now! Quote Link to comment Share on other sites More sharing options...
Wags Posted October 14, 2020 Author Share Posted October 14, 2020 Engine is on blocks ready for the dyno OdinZ, CBR Jeff and C.A.R. 3 Quote Link to comment Share on other sites More sharing options...
Wags Posted October 14, 2020 Author Share Posted October 14, 2020 Engine is in on the dyno CBR Jeff, OdinZ, C.A.R. and 2 others 5 Quote Link to comment Share on other sites More sharing options...
CBR Jeff Posted October 14, 2020 Share Posted October 14, 2020 (edited) Exciting times Jon. I’m guessing your not going to make the dyno run? Jeff Edited October 14, 2020 by CBR Jeff Quote Link to comment Share on other sites More sharing options...
Wags Posted October 14, 2020 Author Share Posted October 14, 2020 13 hours ago, CBR Jeff said: Exciting times Jon. I’m guessing your not going to make the dyno run? Jeff No mate, I’m on a deployment with work and also still can’t cross the border to Vic. Quote Link to comment Share on other sites More sharing options...
Ponyo240z Posted October 15, 2020 Share Posted October 15, 2020 Congrats Jon Wags 1 Quote Link to comment Share on other sites More sharing options...
AndBir Posted October 15, 2020 Share Posted October 15, 2020 On 10/14/2020 at 4:04 PM, Wags said: Engine is in on the dyno Drum roll...............................and the results are? Wags 1 Quote Link to comment Share on other sites More sharing options...
C.A.R. Posted October 15, 2020 Share Posted October 15, 2020 (edited) The dyno cells fuel supply pump failed, so a new one has been ordered, then it has to be fitted. Engine won't be dyno'd until next week now. Edited October 15, 2020 by C.A.F. CBR Jeff and OdinZ 2 Quote Link to comment Share on other sites More sharing options...
Wags Posted October 15, 2020 Author Share Posted October 15, 2020 1 hour ago, C.A.F. said: The dyno cells fuel supply pump failed, so a new one has been ordered, then it has to be fitted. Engine won't be dyno'd until next week now. Thanks mate :-) Les shot me a message re that. Oh well, thems the breaks. C.A.R. 1 Quote Link to comment Share on other sites More sharing options...
C.A.R. Posted October 15, 2020 Share Posted October 15, 2020 (edited) While setting the panel gaps I noticed that the RH door hinges had a small amount of slop. I contacted my friendly Z door pin and bush supplier but he was out of stock. I had to wait, but a couple of weeks ago they arrived and I finally had time to fit them. The pins were obviously slightly worn, however the new pin and bushes (along with a good greasing) have completely removed any movement from the hinges. Should be good for another 50 years now! Edited January 23, 2021 by C.A.F. mossy, OdinZ, Wags and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Wags Posted October 15, 2020 Author Share Posted October 15, 2020 2 hours ago, C.A.F. said: While setting the panel gaps I noticed that the RH door hinges had a small amount of slop. I contacted my friendly Z door pin and bush supplier but he was out of stock. I had to wait, but a couple of weeks ago they arrived and I finally had time to fit them. The pins were obviously slightly worn, however the new pin and bushes (along with a good greasing) have completely removed any movement from the hinges. Should be good for another 50 years now! You’re the man Locky! Stoked with your workmanship and dedication! C.A.R., OdinZ and gav240z 2 1 Quote Link to comment Share on other sites More sharing options...
Wags Posted October 16, 2020 Author Share Posted October 16, 2020 The Dyno ran today. here is the readout: 241bhp at 6500rpm OdinZ 1 Quote Link to comment Share on other sites More sharing options...
Wags Posted October 16, 2020 Author Share Posted October 16, 2020 This is a ramp run from 3500 to 6500 Excellent torque and power curves. Holds power to 6750 before starting to roll off. CBR Jeff, ScottyD, mossy and 1 other 4 Quote Link to comment Share on other sites More sharing options...
Wags Posted October 16, 2020 Author Share Posted October 16, 2020 Credit to Les Collins and the team at LCR! That’s brilliant! gav240z and CBR Jeff 2 Quote Link to comment Share on other sites More sharing options...
C.A.R. Posted October 16, 2020 Share Posted October 16, 2020 Obviously they got the dyno fixed! Those figures should keep you entertained 'ol boy... Wags 1 Quote Link to comment Share on other sites More sharing options...
Wags Posted October 16, 2020 Author Share Posted October 16, 2020 35 minutes ago, C.A.F. said: Obviously they got the dyno fixed! Those figures should keep you entertained 'ol boy... Yes sirree! Quote Link to comment Share on other sites More sharing options...
mossy Posted October 17, 2020 Share Posted October 17, 2020 Nice, makes me glad I'm staying with the 2.4 Wags and gav240z 2 Quote Link to comment Share on other sites More sharing options...
Wags Posted October 19, 2020 Author Share Posted October 19, 2020 On 10/17/2020 at 2:34 PM, mossy said: Nice, makes me glad I'm staying with the 2.4 For sure mate. These things are getting too valuable the swap out a matching numbers engine. mossy and CBR Jeff 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.