ryanzed Posted January 12, 2017 Share Posted January 12, 2017 Hi every one. I have two 280zx wrecks that i want to clean up. Most mechanical bits still here and there. 1 l28 burns oil but ive been driving it for a year 1 auto 1 i think 260z transmission, its gearing is very short and sits at 3500 doing 100 (ill need to confirm what it is), has a bearing noise. 1 Auto diff 1 Manual diff Front brakes hubs shocks Rear brakes hubs shocks sub frame A broad range of interior bits in average condition. Dont be afraid to ask if i have something off a 280zx and ill check for you. Message or call me Ryan on 0448396481 road rider 1 Quote Link to comment Share on other sites More sharing options...
Luwayy Posted January 12, 2017 Share Posted January 12, 2017 Location? Quote Link to comment Share on other sites More sharing options...
Dionysus Posted January 13, 2017 Share Posted January 13, 2017 Morwell , victoria ? Quote Link to comment Share on other sites More sharing options...
Bluebird68 Posted January 13, 2017 Share Posted January 13, 2017 Keen on 260z box if 2.9 first.How much are you after for it Quote Link to comment Share on other sites More sharing options...
ryanzed Posted January 14, 2017 Author Share Posted January 14, 2017 Yes its morwell. As it turns out its not a 260 its a 280z tranny sorry guys Quote Link to comment Share on other sites More sharing options...
manya3084 Posted January 15, 2017 Share Posted January 15, 2017 Looking for a centre console and the lower part of the dash of they are available. Doesn't matter on the colour. Let me know. Cheers, Anthony Quote Link to comment Share on other sites More sharing options...
OZ001 Posted January 15, 2017 Share Posted January 15, 2017 do you still have the strut tubes/hubs from the 280zx? Quote Link to comment Share on other sites More sharing options...
hessian Posted January 17, 2017 Share Posted January 17, 2017 Does anyone know if the 280zx diffs go into a z31? road rider 1 Quote Link to comment Share on other sites More sharing options...
road rider Posted January 19, 2017 Share Posted January 19, 2017 Does anyone know if the 280zx diffs go into a z31? Some 280ZX's came with R180 diffs and some with R200 diffs. Z31's came with the R200. You would need to confirm what ratio you need. road rider 1 Quote Link to comment Share on other sites More sharing options...
road rider Posted January 19, 2017 Share Posted January 19, 2017 What condition are the windscreen wiper cowls in? Being plastic most have gone brittle and are a little sad. I'm hoping you might have a decent one. Also need an airbox from a series 2. Cheers. Quote Link to comment Share on other sites More sharing options...
NoLongerHere Posted January 21, 2017 Share Posted January 21, 2017 After a brake distribution block. Do you have one and if so how much to post to Newcastle? Cheers. Quote Link to comment Share on other sites More sharing options...
Bluebird68 Posted January 23, 2017 Share Posted January 23, 2017 Yes its morwell. As it turns out its not a 260 its a 280z tranny sorry guys okay, and $$$$ your after for it ? Quote Link to comment Share on other sites More sharing options...
Andrew_L26 Posted March 6, 2017 Share Posted March 6, 2017 Hey mate, I'd be interested in a electronic distributor if you've got one? Cheers, Andrew Quote Link to comment Share on other sites More sharing options...
Hempshall Posted March 16, 2017 Share Posted March 16, 2017 If you have a windscreen trim suitable for my 1980 model. I'd be interested. Quote Link to comment Share on other sites More sharing options...
Moderators PB260Z Posted March 16, 2017 Moderators Share Posted March 16, 2017 If you have a windscreen trim suitable for my 1980 model. I'd be interested. Probably a good idea to send Ryanzed a PM as well Quote Link to comment Share on other sites More sharing options...
Aussie Posted October 16, 2017 Share Posted October 16, 2017 hi im after a intake manifold heat shield Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.