Administrators gav240z Posted November 1, 2017 Administrators Share Posted November 1, 2017 Thats cool i didnt know they came in that size, i wonder if they are any good. Rare in that size, I sold 1 carb a while back for about $300. So if you can get a matched set of 3 for $1,200 I reckon that's not bad. OdinZ 1 Quote Link to comment Share on other sites More sharing options...
Hokin Posted November 1, 2017 Share Posted November 1, 2017 https://www.gumtree.com.au/s-ad/heathmont/engine-engine-parts-transmission/nissan-datsun-r200-lsd-long-nose-differential/1164375742 Long Nose R200 LSD Quote Link to comment Share on other sites More sharing options...
Agno Posted November 2, 2017 Share Posted November 2, 2017 https://www.gumtree.com.au/s-ad/heathmont/engine-engine-parts-transmission/nissan-datsun-r200-lsd-long-nose-differential/1164375742 Long Nose R200 LSD The seller is selling a short nose (viscous LSD) center + long nose open diff. You'd have to do some homework to confirm the spline count but unless it came from a non-turbo S13 the spline counts will be wrong for S30 stub axles. Quote Link to comment Share on other sites More sharing options...
KatoKid Posted November 2, 2017 Share Posted November 2, 2017 https://www.gumtree.com.au/s-ad/heathmont/engine-engine-parts-transmission/nissan-datsun-r200-lsd-long-nose-differential/1164375742 Long Nose R200 LSD Sold to me...just the open 3.54 Quote Link to comment Share on other sites More sharing options...
OdinZ Posted November 2, 2017 Share Posted November 2, 2017 https://www.ebay.com.au/itm/263288701938 Triple 48 Dellorto's. These look very tempting. Dont know enough about them though. Would i be right in saying 48s are a bit big for a standard L26? Quote Link to comment Share on other sites More sharing options...
Administrators gav240z Posted November 2, 2017 Administrators Share Posted November 2, 2017 I'm not sure with Dellorto's but with Mikuni's you can choke them down. Better to go big and make em smaller than go small and try and make em' bigger. OdinZ 1 Quote Link to comment Share on other sites More sharing options...
Hokin Posted November 5, 2017 Share Posted November 5, 2017 Datsun Z hubcaps https://www.ebay.com.au/itm/datsun-240Z-original-wheel-trims-set-4/332436708644?hash=item4d66c59d24:g:ii8AAOSwFqNZWIfM Quote Link to comment Share on other sites More sharing options...
lando Posted November 6, 2017 Share Posted November 6, 2017 https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fulk%2Fitm%2F282722501335 Thoughts? Quote Link to comment Share on other sites More sharing options...
Administrators gav240z Posted November 6, 2017 Administrators Share Posted November 6, 2017 https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com.au%2Fulk%2Fitm%2F282722501335 Thoughts? I have a pair of those, good for 40mm carbs. That eBay seller deals a lot in Mikuni's I believe they have a website. https://www.youtube.com/channel/UClHMvCcDDaBXz9TMsu4MXiw http://www.gl2007.com/usa_kyusha.html Sadly deleted a bunch of their videos on Youtube. I used to like going there and listening to an L-series scream! Quote Link to comment Share on other sites More sharing options...
OdinZ Posted November 9, 2017 Share Posted November 9, 2017 Italian 45mm DCOE13 Webers, comes with Torana manifold though. Not sure if the carbies are suitable for our z's, if not feel free to delete this https://www.ebay.com.au/itm/Triple-45dcoe13-Weber-Carburettors-Came-Of-My-Holden-6-Torana-LJ-Made-In-Italy/263288723880 Quote Link to comment Share on other sites More sharing options...
Agno Posted November 10, 2017 Share Posted November 10, 2017 Italian 45mm DCOE13 Webers, comes with Torana manifold though. Not sure if the carbies are suitable for our z's, if not feel free to delete this https://www.ebay.com.au/itm/Triple-45dcoe13-Weber-Carburettors-Came-Of-My-Holden-6-Torana-LJ-Made-In-Italy/263288723880 Fucking snipers. I'm fuming OdinZ 1 Quote Link to comment Share on other sites More sharing options...
OdinZ Posted November 10, 2017 Share Posted November 10, 2017 Fek.....so these are good carbs then. I see all of these different numbers and stuff after DCOE, 2,3,13 so i wasnt sure. Quote Link to comment Share on other sites More sharing options...
lando Posted November 13, 2017 Share Posted November 13, 2017 even the 1:6 models are expensive https://www.ebay.com/itm/OS-TC24-B1Z-Engine-1-6-scale-finished-model-from-JAPAN/122806337431?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D1%26asc%3D41376%26meid%3D4f893b5634194331b42de338602b0b8b%26pid%3D100011%26rk%3D5%26rkt%3D7%26sd%3D282664294763&_trksid=p2047675.c100011.m1850 gav240z 1 Quote Link to comment Share on other sites More sharing options...
andyk_79 Posted November 13, 2017 Share Posted November 13, 2017 even the 1:6 models are expensive https://www.ebay.com/itm/OS-TC24-B1Z-Engine-1-6-scale-finished-model-from-JAPAN/122806337431?_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D1%26asc%3D41376%26meid%3D4f893b5634194331b42de338602b0b8b%26pid%3D100011%26rk%3D5%26rkt%3D7%26sd%3D282664294763&_trksid=p2047675.c100011.m1850 Far out at $800 I would want something that fired up and drove a scale model car at least! That price seems extremely opportunistic Quote Link to comment Share on other sites More sharing options...
Hokin Posted November 21, 2017 Share Posted November 21, 2017 May be a little on the smaller side, but could be a cheap way of getting some triples. https://www.gumtree.com.au/s-ad/hallam/engine-engine-parts-transmission/solex-mikuni-carburetors/1166455154 OdinZ 1 Quote Link to comment Share on other sites More sharing options...
OdinZ Posted November 21, 2017 Share Posted November 21, 2017 May be a little on the smaller side, but could be a cheap way of getting some triples. https://www.gumtree.com.au/s-ad/hallam/engine-engine-parts-transmission/solex-mikuni-carburetors/1166455154 I assume hard to tell from these photos, but they kind of look different, is it possible though that there is atleast 1x S4 and 1x S5? i.e. not matched? Quote Link to comment Share on other sites More sharing options...
Hokin Posted November 23, 2017 Share Posted November 23, 2017 Repro front rad support for later post 74' 260Z https://www.gumtree.com.au/s-ad/doreen/auto-body-parts/260z-radiator-support-panel/1166614576 OdinZ 1 Quote Link to comment Share on other sites More sharing options...
Administrators gav240z Posted November 28, 2017 Administrators Share Posted November 28, 2017 https://www.ebay.com.au/itm/Datsun-240Z-Triple-Mikuni-40PHH-36-Venturi-Horns-and-Extra-Jets/263345096796Triple 40mm Mikuni's. AU $1,300.00 buy it now. 40 mm Solex/Mikuni Triple Carbs with 36 mm (Chokes) Venturis .. Includes Air horns and Isolators-- ALL HAVE BEEN ZINC PLATED !! Completely rebuilt and Micro polished in USA by PALTECH. Originally bought these from the USA. They are set up for a 3.1. We found a set for our standard Z with a manifold so we have never used or installed these - so, as nice as they are, they have to go Jets etc included: 36mm venturis 165 fuel 210 air 60 pilot 45 pump nozzle 155, 160, 170 and 175 fuel jets 190 and 230 air jets Have a manual for tuning etc These carbs are still popular in the US with various parts available Needs a manifold to suit but will fit the standard Weber compatable manifold readily available. Would also suit twin cam 4 cylinders - have a spare carb! OdinZ 1 Quote Link to comment Share on other sites More sharing options...
Administrators gav240z Posted December 3, 2017 Administrators Share Posted December 3, 2017 https://m.ebay.com/itm/Datsun-NISMO-44mm-Mikuni-Solex-3-Carb-Intake-w-linkage-240z-260z-280z-280z-/292355250453?_mwBanner=1 44s on Nismo Manifold. Quote Link to comment Share on other sites More sharing options...
Agno Posted December 3, 2017 Share Posted December 3, 2017 The middle carb is a solex and the other two are Mikunis. Interesting... https://m.ebay.com/itm/Datsun-NISMO-44mm-Mikuni-Solex-3-Carb-Intake-w-linkage-240z-260z-280z-280z-/292355250453?_mwBanner=144s on Nismo Manifold. Quote Link to comment Share on other sites More sharing options...
Administrators gav240z Posted December 4, 2017 Administrators Share Posted December 4, 2017 The middle carb is a solex and the other two are Mikunis. Interesting... I think that's just the jet cover, I am actually more worried about the serious level of corrosion I see... seller got a bit upset when I queried that on Facebook. Perhaps best avoid this set.. Quote Link to comment Share on other sites More sharing options...
Administrators gav240z Posted December 4, 2017 Administrators Share Posted December 4, 2017 Set of Triple 40's. https://www.ebay.com/itm/Mikuni-40mm-PHH-Carburetor-Datsun-240z-260z-280z/162785452708 MikeZ 1 Quote Link to comment Share on other sites More sharing options...
Fatdat Posted December 4, 2017 Share Posted December 4, 2017 (edited) https://m.ebay.com.au/itm/datsun-240z-original-spare-topy-wheel-and-tyre-260z-/263363424572 240z topy with original tyre Edited December 4, 2017 by Fatdat GongZ 1 Quote Link to comment Share on other sites More sharing options...
GongZ Posted December 5, 2017 Share Posted December 5, 2017 https://m.ebay.com.au/itm/datsun-240z-original-spare-topy-wheel-and-tyre-260z-/263363424572 240z topy with original tyre Starting bid $500 !!?? Quote Link to comment Share on other sites More sharing options...
Administrators gav240z Posted December 6, 2017 Administrators Share Posted December 6, 2017 Power steering kit anyone? Looks electric. https://page.auctions.yahoo.co.jp/jp/auction/f245444253 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.