240ZR Posted August 23, 2007 Share Posted August 23, 2007 As topic states... can anyone help? Nick. Quote Link to comment Share on other sites More sharing options...
Toecutter Posted August 23, 2007 Share Posted August 23, 2007 Warrenz has got part numbers for new ones, aftermarket. CLIPSAL is the brand from memory. Sulio Quote Link to comment Share on other sites More sharing options...
warrenz Posted August 23, 2007 Share Posted August 23, 2007 I purchased Hemco seatbelts back in 2003, they are made here in Victoria. Part No. S1790006 Front Inertia Reel Belt and 330mm stalk.Make sure you ask for the stalk with the right angle fitting so it bolts to floor easily. You also need part S1800074 200mm Drop Link. This lets the belt hang down from roof such that it comes over the shoulder correctly. Naturally you need 2 of each, back in 2003 total cost was $220. Here is there web site http://www.hemco.com.au/ Warren Quote Link to comment Share on other sites More sharing options...
240ZR Posted August 24, 2007 Author Share Posted August 24, 2007 I purchased Hemco seatbelts back in 2003, they are made here in Victoria. Part No. S1790006 Front Inertia Reel Belt and 330mm stalk.Make sure you ask for the stalk with the right angle fitting so it bolts to floor easily. You also need part S1800074 200mm Drop Link. This lets the belt hang down from roof such that it comes over the shoulder correctly. Naturally you need 2 of each, back in 2003 total cost was $220. Here is there web site http://www.hemco.com.au/ Warren Hi Warren, Firstly, thanx for your input... secondly, could I bother you with some pics perhaps? My e-mail address is nixcars@exemail.com I'm trying to finish my 260Z for our concourse which is on Sept the 16th. I've just finished trim, carpets, seats, & dash... all I need are seat belts & to hook up the air/con & it's just about done. Regards, Nick. Quote Link to comment Share on other sites More sharing options...
Carlos Posted August 25, 2007 Share Posted August 25, 2007 Do the belts from hemco go into the original mounts? Where does the retractor sit, as i've got aftermarket seats which I believe reduces the space at the bottom mount. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.