zed74 Posted February 27, 2012 Share Posted February 27, 2012 Hi Why no Kameari timing chain tensioner setup on this one? Quote Link to comment Share on other sites More sharing options...
peter mc Posted February 27, 2012 Author Share Posted February 27, 2012 I don't use them because i don't shave the head more than i have to , so the Chane is tight with standard guides Quote Link to comment Share on other sites More sharing options...
jamo240 Posted February 27, 2012 Share Posted February 27, 2012 Hey Pete. Sorry to hear you're giving it up for a living, but them's the breaks. Let me know if you want to have a go at working on locomotive engines....plenty of work at our place. Cheers Jamo Quote Link to comment Share on other sites More sharing options...
d3c0y Posted February 29, 2012 Share Posted February 29, 2012 Hi Why no Kameari timing chain tensioner setup on this one? Cause the cheapest i can get it for is $600 i can think of better ways to spend that... Quote Link to comment Share on other sites More sharing options...
DTF260 Posted February 29, 2012 Share Posted February 29, 2012 ha, i used to work on those darned things. (locos) Quote Link to comment Share on other sites More sharing options...
peter mc Posted March 8, 2012 Author Share Posted March 8, 2012 some pics of the head for the stroker ,,,, lots off work to make all cylinders make the same hp . all inlet ports flow 360hp at 600th Quote Link to comment Share on other sites More sharing options...
perrin_07 Posted March 8, 2012 Share Posted March 8, 2012 you were telling me when you came around there wasnt enough money in it. Shame, cos you obviously have massive amounts of knowledge and skill in what you do! Im sure the TAFE in traralgon would be great for you to teach at . Quote Link to comment Share on other sites More sharing options...
luvemfast Posted March 8, 2012 Share Posted March 8, 2012 Look at those port walls! Nice work Quote Link to comment Share on other sites More sharing options...
d3c0y Posted March 9, 2012 Share Posted March 9, 2012 I'm sad i don't get to see it all in bits before it gets assembled That and the fact that I read all the zed forums and all the L series engine building books and i still cant provide any worthwhile input after years of research Quote Link to comment Share on other sites More sharing options...
luvemfast Posted March 9, 2012 Share Posted March 9, 2012 I'm with you on that one Jake. I'm no newbie to Datto's or engineering. Which is why I laugh so much when these "text book mechanics", argue with or try and discredit builders like Peter. Quote Link to comment Share on other sites More sharing options...
d3c0y Posted March 9, 2012 Share Posted March 9, 2012 In Pete's defence he did say he would put a cam tower spray bar in it just to humor me hahaha. Quote Link to comment Share on other sites More sharing options...
peter mc Posted March 10, 2012 Author Share Posted March 10, 2012 I'm sad i don't get to see it all in bits before it gets assembled That and the fact that I read all the zed forums and all the L series engine building books and i still cant provide any worthwhile input after years of research HEHEH don't feel bad iv been building motors for 25years and I'm still getting better all the time working with Les collins has helped so much , working with men like him has been the best learning ,his work has helped mine like no other , i have been doing the best work i have ever done , and your motor has helped sharpen both our skills, the port work and air flow work on the p90 has been such a fight to find new levels , and Finnish for me . finding new levels of hp is hard 300hp is hard, 350hp NA well that's just a hard fight and has been so much fun , ... and don't think we don't read the books we do all the time Quote Link to comment Share on other sites More sharing options...
waxhead Posted March 10, 2012 Share Posted March 10, 2012 600 thou is alot of lift to get that 360 hp potential. Its going to be hard getting the guides to last. 15.24mm lift is huge. What cam are you using Quote Link to comment Share on other sites More sharing options...
peter mc Posted March 10, 2012 Author Share Posted March 10, 2012 well 600 is a big cam but not the biggest you can buy by a long shot most of the cams i use for race zeds are in the high 500 to low 600 size , , but 350 hp is not your nornal zed and 240cfm is not easy to get out of a zed head so it needs a big cam to make it happen cam has 310d and 590 lift 105 center its 600 on the cam sheat, but its 590 in the head 10th valve clearence Quote Link to comment Share on other sites More sharing options...
waxhead Posted March 10, 2012 Share Posted March 10, 2012 Yeah your right. I dont realise this was a race engine I thought it was a road engine. Hard to drive an engine like that on the road. It will certainly not be scared to rev with that flywheel , cam and carbs. Quote Link to comment Share on other sites More sharing options...
peter mc Posted March 10, 2012 Author Share Posted March 10, 2012 dont forget its 3.4 L and will have more torque than most , and it will idle and pull from 3 all the way ,it wont be hard to drive at all just lodes of fun heheh .. the same cam is in simons L29 and he drives it on the street all the time loves it Quote Link to comment Share on other sites More sharing options...
luvemfast Posted March 10, 2012 Share Posted March 10, 2012 Get it right Pete. It's an L30 Quote Link to comment Share on other sites More sharing options...
peter mc Posted March 10, 2012 Author Share Posted March 10, 2012 heheh L29 .5 lol Quote Link to comment Share on other sites More sharing options...
waxhead Posted March 10, 2012 Share Posted March 10, 2012 Im sure you will be able to drive it on the street. Im not sure that with 50mm carbs and a lightweight flywheel with that cam it will be that great for cruising. But each to there own. If that's what the customer wants then that's what they get Quote Link to comment Share on other sites More sharing options...
d3c0y Posted March 11, 2012 Share Posted March 11, 2012 Since you are on the Gold Coast there is a fair chance you will probably able to come and see how it goes if ya want Quote Link to comment Share on other sites More sharing options...
waxhead Posted March 11, 2012 Share Posted March 11, 2012 It will be interesting to see it. I will hopefully have caseys finished as well. you can have a race Quote Link to comment Share on other sites More sharing options...
d3c0y Posted March 11, 2012 Share Posted March 11, 2012 Oh you are building his enigne? Has he decided if he is going turbo or not yet? I'll be definitely taking my car to Williow bank so we will have to try and talk him into it also. Although last time i was talking to Casey he was talking about it being year(s) away? Quote Link to comment Share on other sites More sharing options...
waxhead Posted March 11, 2012 Share Posted March 11, 2012 Yeah its me building his engine. It may be a year away Im building a few other engines at the moment so they are keeping me busy Quote Link to comment Share on other sites More sharing options...
peter mc Posted March 27, 2012 Author Share Posted March 27, 2012 getting close dyno next Tuesday Quote Link to comment Share on other sites More sharing options...
Gordo Posted March 27, 2012 Share Posted March 27, 2012 Guys, I think this will be ground braking stuff. Looking forward to it. could make 380 hp Peter? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.