Jump to content
Sign in to follow this  
zedevan

Suspension options and prices

Recommended Posts

thanks for that, as u can see i have no idea...so y not get the struts sectioned at hte same tiem? or these dont require engineers?

Share this post


Link to post
Share on other sites

for bushings, in Australia, I believe Noltec in sydney are good, can get eccentric bushes etc which will give u limited adjustability in suspension w/o going all out. (have a look at www.noltec.com.au for prices and parts+details)

 

Along those same lines, K-mack(?) makes a part which you drill and weld into front crossmember allowing slight adjustment of front camber as well.

 

I've their bushes throughout but have only just got new tyres and adjustments so I don't know how it drives yet!!

 

hope that helps

Huw

Share this post


Link to post
Share on other sites
:D Yeh i have to have the struts sectioned and it will require engineering cos im altering the strut, plus it does require welding, but i will have 4 inches of adjustment and a pretty damn good spring rate. As for shockies, i already have Koni internal adjustables so it didnt cost me quite as much. (mind you, some bastard put 240Z rear struts on my zed before i bought it so i had to buy rear 260Z struts).

Share this post


Link to post
Share on other sites

yeah i know i want coilovers, just dont want to spend that sort of money atm, so i just bought some king springs off nacks along with his newly regassed koni rears, so all i really need now is some koni 86-1811, which i think are the ones that are used on the front of both 240z's and 260z's just the 260z's need the gland nuts changed or something.

 

do people think i should try to change the shocks myself at home? i'm just worried that it will leave my car unusable due to not being able to do something. i think i remember something somewhere saying to put in some of the springs you dont need spring compressors to put in some springs because they are so short...is that the case with low king springs? my dad keeps telling me its easy to do this and that but is to busy to actully commit to helping me :(

 

there's something wrong with my stearing which is my main concern atm, the people at top performace said i should give the 1600 workshop a try as its fairly local, does anyone else have a place they'd recommend? speed technology? as i think i'm going to get the adjustable whiteline sway bars from there at some stage

 

does anyone have some of those koni 1811 shocks by anychance that they want to sell?

Share this post


Link to post
Share on other sites

Ok so the coilover kit at the previous link is being installed right now. It ended up costing me just over $800 just to get them here plus the rear Mac struts and the labour (also had to have rear konis adjusted for 260 struts), so I'm yet to find out exactly how much all up, but as soon as they are done I will update and let you know how they go. I also ended up getting 225lbs/in front and 250lbs/in rear springs in 10in long, which is about 4kgs/mm i think, not the stiffest ever, but ehy they are coilovers, springs are easy now. And I will find out about the swaybars tomorrow hopefully :)

Share this post


Link to post
Share on other sites

Well after all this I have learnt a great lesson, don't rush and talk to your suspension guy first. All the equipment is available in oz to work except for the adjustable camber tops which I got from T3 in the states. Unfortunately these have to be welded in therefore you loose the top bolts that the strut brace would bolt to.

Also, we weighed the car in all for corners at once to see what the best spring rates were for the car and are nothing like what I ordered from the states, so now I will be running dual stage Eibach springs. So here is what has ended up happening. Note the new strut brace.

post-94-144023472033_thumb.jpg

post-94-14402347204_thumb.jpg

post-94-144023472049_thumb.jpg

Share this post


Link to post
Share on other sites

Just one thing, has anyone else had the top flat section where the seat belt bolts into the top of the strut tower held in by about 6 small screws? We ended up tig welding it so its strong as, but it might be worth while people having a look, cos it wont hold in an accident.

Share this post


Link to post
Share on other sites

Finally, after a stupid amount of time waiting for Bilstein to build me some shocks, I have finished my rear suspension (except for springs).  I had to get Bilstein to make me some because the struts were wider and Koni had them listed as being the same, dont know what the go is there.

 

A couple of pics, ill get some closer shots later.

Note, rear disk calliper brackets :D

 

DSC00691.jpg

 

DSC00690.jpg

 

This was a very expnsive venture all up, especially having to get the 240Z rear struts cut up for height adjustment and then the 260Z rear ones.

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×