Dionysus Posted April 14, 2016 Share Posted April 14, 2016 Hi Is some one able to measure the distance the center stitching is separated on a 240z seat please! I've attached a picture to explain what I'm after. Thanks John Quote Link to comment Share on other sites More sharing options...
GongZ Posted April 14, 2016 Share Posted April 14, 2016 I hope these photos help - it was tricky to get a clear image of the tape markings without the flash washing them out. The first photo shows where I positioned the tape measure. The subsequent shots are close ups, starting at the top, with the tape remaining stationary George 1 Quote Link to comment Share on other sites More sharing options...
Dionysus Posted April 14, 2016 Author Share Posted April 14, 2016 Perfect thanks! Quote Link to comment Share on other sites More sharing options...
Dionysus Posted April 14, 2016 Author Share Posted April 14, 2016 While we're here the strip that runs down along side the centre section you measured for me, is it a seperate piece of vinyl over the top or 1 piece with the rest? If that makes sense. Quote Link to comment Share on other sites More sharing options...
GongZ Posted April 14, 2016 Share Posted April 14, 2016 I am not really sure what you mean, but this Youtube video shows a reproduction seat cover turned inside out. You can clearly see the separate panels, and I believe that they are the same as the original factory seats; Screen capture from 0:18 mark; Quote Link to comment Share on other sites More sharing options...
Dionysus Posted April 14, 2016 Author Share Posted April 14, 2016 Thanks again gongz Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.