blu260z Posted October 11, 2015 Share Posted October 11, 2015 (edited) Hey guys. I have recently removed the engine from my 260z 2+2 gave it a little cleanup and engine bay cleanup. I put the wiring harness in split tube and added wiring for thermo fans (seperate from original harness). The problem I am having is I have no heater, fuel pump or starter motor. With the ignition turned on I have power to starter/alternator but not to the fuel pump. I am having trouble finding a wiring diagram as most are either US or are not for a 76. I have checked all my engine bay grounds and all are good (checked resistance with multimeter) I even added more just incase. All wireing was working previous to engine being removed. Is it possibly something like the ignition relay or another relay, or even the fusible link on the ignition side ? Thanks guys Edited October 11, 2015 by blu260z Quote Link to comment Share on other sites More sharing options...
blu260z Posted October 12, 2015 Author Share Posted October 12, 2015 Fusible links it was time to rip them out and modern it up a little Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.