Jump to content

Blue Z

Members
  • Content Count

    55
  • Joined

  • Last visited

2 Followers

About Blue Z

  • Rank
    Advanced Member

member details

  • Location
    Melbourne, Australia
  • Tagline
    New Member
  1. Blue Z

    Performance Wheel Centre Covers

    Hi CraigZ, Would you still like to take them?
  2. Blue Z

    Performance Wheel Centre Covers

    Hi 1000 plus club, The centres will suit about 77-78mm, it not perfect measurement with the plastic. Do you still want them? Regards BlueZ
  3. Hi All, I have the 4 x centre caps from some performance wheels, which no longer have. They are brand new never used. For a $10 donation to the VicZCar website they are yours, I will even look after the shipping within AUS. Please make a comment that you would like them and send msg of proof of donation and I will then ship. BlueZ
  4. Blue Z

    Emi Camber Plates - Where To Find Them?

    Hi Greg, These guys have few options, I have never used them but would be my choice. https://technotoytuning.com Regards Blue Z
  5. Blue Z

    Tutorial: SR/CA Gearbox onto L-series engine

    Hi All, Good news I now have the bell housing off, I ended up breaking the seal by forcing in an window scraper blade. 1) As I have no shifter does anyone have a recommendation for a short shifter for the RB20 gearbox? 2) Any recommendations for the machining on the L series bell housing in Melbourne? Thanks Blue Z
  6. Blue Z

    Parts For Sale

    Any offers on the oil temp gauge considered, also happy to post it. Perfect to make sure your not cooking your oil. Blue Z
  7. Blue Z

    Tutorial: SR/CA Gearbox onto L-series engine

    Thanks Lurch, Looks like need a big soft hammer to open it up, as you suggest, it hasn't moved yet.
  8. Blue Z

    Tutorial: SR/CA Gearbox onto L-series engine

    Hi All, I have an RB20 gearbox and I have done the following: 1) removed front cover plate, inside bell housing 2) removed bearing circlip under cover plate 3) removed bolts from sandwich plate holding bell housing on The issue is that I can't take the bell housing off, have I missed something? BlueZ
  9. Blue Z

    Parts For Sale

    Air box and Filter now sold. Oil temp still available
  10. Blue Z

    Parts For Sale

    Hi All, Few pieces that I have in the shed: 1) Sparco oil temp gauge, thermal expansion type $30 (due to change of sump I had to change to electric sender type) 2) 90 deg 3" stainless bend and K&N filter $60, Filter needs a clean but otherwise fine. 3) L28 Airbox to suit 45mm Webber or EFI hardware ITB, $100. (Made by Gordon Dobbie) Location Eastern Suburbs Melbourne Would be open to a trade on a reasonable 260z 2+2 boot lid with glass. Regards Blue Z
  11. Hi Justin, Yes one with switch, yes O rings only from memory.
  12. Hi Justin, I had the exactly the same issue, just pull out the pressure differential switch and replace O rings. The O rings in mine had split and caused this fluid pumping issue. Good luck, Blue Z
  13. Blue Z

    Gearbox Identification - 280Zx

    Hi Lurch and Dat2man, Thanks very much for the feedback, so based on this being 71B, I assume this will be the close ratio set for the gearbox? " L-Type: Only for FS5W71B Transmission type. HR31: Only vehicles before 8/87 Get this and all your JDM at RHDJapan!" http://www.rhdjapan.com/kameari-super-close-gear-set-l-type-fj20et-hr31-zenki.html Which would provide these ratios:- 1st: 2.624 - 2nd: 1.814 - 3rd: 1.360 - 4th: 1.000 - 5th: 0.813~0.93
  14. Blue Z

    Gearbox Identification - 280Zx

    Hi Guys, Hoping that you can help and provide the gearbox ID number for this box? It was from a 280zx with 5 speed manual from about 1978. I am looking at one of the Kameari close ratio kits and just want to make sure I pick the right one for this gearbox. Thanks for your help, Blue Z
×