Jump to content


  • Content Count

  • Joined

  • Last visited


About zzzzed

  • Rank
    The 2000+ club

member details

  • Location
    south australia
  1. zzzzed

    Wanted - 240Z

    Pm coming
  2. zzzzed

    Detonation And Preignition ?

    Ahh ok. I think I need to get it on th dyno and let some one who knows what they are doing have a go.
  3. zzzzed

    Rust Repair Sections Group Buy

    I was going to ask for a beaver but I think after looking at those pics I could actually do a better job making them my self
  4. zzzzed

    Detonation And Preignition ?

    I havnt touched the idle speed. I might up the timing a couple of degree and see if I can add a bit of fuel to the mix to try stop the pinging
  5. zzzzed

    Detonation And Preignition ?

    Hmm I think the total advance of the dizzy is around 22 degree
  6. zzzzed

    Detonation And Preignition ?

    That wouldn't make it preignite though would it. I thought it might be a carbon build up and now it is burning hotter the carbon is making it preignite
  7. zzzzed

    Detonation And Preignition ?

    I have recently swapped my standard points distributor for a Mallory electronic distributor First issue was I had to reduce the timing from 10 degree down to 5 degree to stop detonation Second issue is that I am now getting preignition after longer drives. Could the stronger spark be making the fuel mixture lean? I am running British Su carbs from an Austin Healy on a standard l28.
  8. zzzzed


    You take some pretty good photos. I hope you don't mind I have stolen the photos you took of my car. They are my new favourites. ?
  9. zzzzed

    S.a. Z Car Facebook Group

    No mate all you need is the passion.
  10. Just my opinion but a rotor in a zed is as wrong as it gets. Sure it would go well and be a barrel of laughs. But just no. It just doesn't sound right. Sorry gav. ?
  11. Scroll down for the goodness http://www.speedhunters.com/2015/10/recording-the-sounds-of-need-for-speed/
  12. I havent had any scrubbing yet mate It is back to round top sucarbs right now but when it had triples I put the smallest choke size in them I could for the stock l28.
  13. Hey mate the wheels are 15x8 zero offset Tyers are 205 60 15 I did the naughty chop chop on the standard spring until I replace them with coil over when I give it a full rebuild. I cut 1 full coil out of each spring.
  14. Some low happened this weekend. Check out the before and after shot