| Category |
Albums |
Files |
|
141 |
1331 |
|
| Auszcar EventsImages from events as the now Auszcar.com previously Viczcar.com |
|
|
| Viczcar EventsThis is where you will find Photos of Victorian Z Car Events. |
|
|
6 |
269 |
|
|
2 |
365 |
|
|
2 |
90 |
|
|
4 |
190 |
|
| 2249 files in 156 albums and 8 categories with 327 comments viewed 523549 times |
| Random files |
3dec05_5.jpgZED -24T186 viewsPutting in the bits & Pieceszed24t
|
|
hole_in_hatch.jpgrust hole 2 of 386 viewsrust hole 2 of 3pauly_adams
|
|
truck.jpg90 chev 3/4 ton 4x4 long box extra cab98 viewsgator3535
|
|
P4270001.jpgNot my favorite Z day233 viewszr240
|
|
|
ZStripback2a.pngFront end and door mounts0 viewsa close up of the strip back of front end and door mount area prior to repairs and painting. MrKaos
|
|
| Last additions |
ZStripback1a.pngFront end restoration2 viewsI had to keep the drive train in, the engine and wheels in so I could move it around. This dictated how things were cleaned up and painted. MrKaosNov 19, 2008
|
|
ZStripback2a.pngFront end and door mounts0 viewsa close up of the strip back of front end and door mount area prior to repairs and painting. MrKaosNov 19, 2008
|
|
ZStripback3a.pngStripping the hard bit inthe front end0 viewsI wanted to make sure that the parts that won't be seen get a good clean up ready for repairs and schtien slaging. You will notice that the engine is still in there - which I just had to put up with - later it was removed so I could complete the engine bay and transmission tunnel. time time timeMrKaosNov 19, 2008
|
|
ZStripback4a.pngStriping body and panels0 viewsI did a lot of preparation striping back the whole car and identifying where rust repairs had to be done. After the Welding was done the body was flattened out.MrKaosNov 19, 2008
|
|
WingStriped.jpegStriping and re-inforcing the rear wing2 viewsYes, it's a big wing on a Z, but I kinda like it. Unfortunately they can get damaged and split down the middle - so this wing has been reinforced by layering fibreglass over the critical area and allowing a long cure time.MrKaosNov 19, 2008
|
|
31102008235.jpgStripped wheel well18 viewsThis is what a Zed looks like nude, shiney metal all welded and happy. From the looks of it after stripping you can see where some of the original pop rivets get tired and crack loose. All these were re-welded. After this the car was primed, stien slaged, primed and paintedMrKaosNov 17, 2008
|
|
