Jump to content
Sign in to follow this  
EvilZ

JDM or AUDM 240z/260z Front Turn Signal Lights

Recommended Posts

Hello everyone,

 

I am looking for either jdm or audm turn signals left and right. I would love to get them complete with the harnesses or at least the front lenses only.

 

Did the AU cars only come with clear lenses or did they also come with the one from the picture below? Any cars being parted out? Can also trade for any parts that may be needed. Thanks!

 

537943130_uB62G-O.jpg

Share this post


Link to post
Share on other sites

The early 240z 70-72 had a clear lens, but 73 240z's had this split design and all later 260z's should have had it also. So you should be able to still get them.

 

To be honest if you're going to spend all the time and effort getting some I'd buy brand new, most second hand ones are in pretty poor condition by now.

 

 

Share this post


Link to post
Share on other sites

'73 240Z still had the all clear park light style.

On Australian eBay there is a company making reproduction ones.

Share this post


Link to post
Share on other sites

they're slightly different sizes, i'll try to take a comparison photo of them tonight if they're at my place.

 

I'm after a pair of completely orange ones...not happy with the condition of the ones I have, mainly as they are different as from different companies

Share this post


Link to post
Share on other sites

Hello everyone,

 

I am looking for either jdm or audm turn signals left and right. I would love to get them complete with the harnesses or at least the front lenses only.

 

537943130_uB62G-O.jpg

Why didn't you buy those ones when you took the picture?

Share this post


Link to post
Share on other sites

Thanks for the information. The ones in the picture I stole from the internet so it is easy to see what I am talking about.

 

I woud love to buy a set of new split lense units if I can. Anyone have a lead or set sitting around? If I can't find that than I am willing to just buy a set of clear lenses. Any of you buy those repo lenses from Ebay? I didn't want to gamble yet on them and they not fit the housing correctly.

 

Zedevan - are you looking for new lenses or complete units (orange) OEM?

 

Also anyone have the part number to the split lense units?

 

 

Share this post


Link to post
Share on other sites

I bought the all clear 240Z lenses and they look pretty damn good for the money. I'm just trying to find some good condition backs now.

Share this post


Link to post
Share on other sites

Hey Dimitri I'm still after some good condition backs and globe holders if you have any? I have new lenses now.

Share this post


Link to post
Share on other sites

I have an average pair if needed.. How good a set are you after?

 

I am after a pretty good set. You have the 260z split lense with housing and harness?

Share this post


Link to post
Share on other sites

Mine do have the front clear and internal amber lens; I'll have a dig through and find some good ones.

 

Hey Dimitri I'm still after some good condition backs and globe holders if you have any? I have new lenses now.

 

Sorry, I keep forgetting...240Z single or 260 double hole housings?

Share this post


Link to post
Share on other sites

240Z single, no lenses needed but if you have two sets of screws that would be great!

Share this post


Link to post
Share on other sites

Can't believe I missed these! Was so busy working on the car....these are exactly the turn signals I am looking for with harnesses.

 

http://www.ebay.com/itm/Datsun-260Z-Headlights-Parking-Lights-Etc-/110951200044?_trksid=p2047675.l2557&ssPageName=STRK:MEWAX:IT&nma=true&si=yVQ%2FSAACvDdpS7dy5YZgJMZ5DIo%3D&orig_cvip=true&rt=nc

 

 

Hope one of you guys out there have a spare set willing to sell.....  :)

Share this post


Link to post
Share on other sites

try this guy on ebay,he does the clear lenses aswell

http://www.ebay.com.au/itm/Datsun-240Z-260Z-park-turn-lens-HOUSING-RH-NEW-REPRODUCTION-/251177968999?pt=AU_Car_Parts_Accessories&hash=item3a7b5fa567

 

you can use the rear light holders from a 240Z tail light to make a new harness but you might need to use a rubber o ring if you think water might get in  or some grease

Share this post


Link to post
Share on other sites

Thanks Charlie - for now I am looking for OEM.

 

Can't believe I missed a set a few weeks back on ebay. Just gotta keep looking. lol

 

Share this post


Link to post
Share on other sites

Ok here they are. I have the ones on my V8 Zed or the others unrestored from Aussiezed which have no cracks and would come up a treat. Both are OEM.

post-762-144023702584_thumb.jpg

post-762-144023702586_thumb.jpg

post-762-144023702588_thumb.jpg

Share this post


Link to post
Share on other sites

Sorry for the late reply it's been a very busy Christmas. Houston we have a problem, on removing the front lights from the panels i discovered a crack in the LH side Lense and the RH Backing also has some damage. The rubbers are fine but one of the seperators are missing but the RH side lense is perfect. I'll see if i can chase up a full set but in the condition you are after it may take some time.

Share this post


Link to post
Share on other sites

No problem. I would still take them in that condition if you have the harness with them. I can start looking on how to adapt them to my 260z until a very nice set comes along. I can take care of you $ for your troubles.

 

 

Thanks.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×