RB 28 BUILD
Posted 17 November 2011 - 09:48 PM
Posted 17 November 2011 - 10:49 PM
there oil jets Rb26 have piston oil spray to cool the piston ... 2jz and many others do to ,most good turbo engines have them ,
Posted 18 November 2011 - 05:19 PM
Posted 18 November 2011 - 05:41 PM
Makes it easier to align the head onto the block & helps head-to-block stability.
Posted 21 November 2011 - 06:44 PM
i have the short motor built . will start putting the head together tomorrow now all the parts are hear, the specs on the head have changed , it now has cosworth springs and ti valve retainers from tomei good for 10,000rpm and 35psi and the cam specs are now 11mm lift
Posted 21 November 2011 - 06:52 PM
Posted 30 November 2011 - 05:39 PM
Posted 30 November 2011 - 08:41 PM
This will blow the doors off for sure..... Mainly due to the fact you stole the hinges
Posted 30 November 2011 - 08:52 PM
What are you doing about pickup? External or will you lengthen the pickup, utilise the rb26 point and make more mods to the pan?
Posted 30 November 2011 - 09:01 PM
Posted 01 December 2011 - 02:55 PM
Posted 01 December 2011 - 04:43 PM
Posted 01 December 2011 - 06:05 PM
Is that the original pickup tube that you used?
Posted 01 December 2011 - 06:21 PM
Posted 01 December 2011 - 06:26 PM
so i tapped the oil pump for dash 10
Looks like great work Pete as usual.
Posted 01 December 2011 - 08:20 PM
And a big + 1 for the external pickup. My brother had big drama with low oil pressure and high oil temps in his LJ Group Nc. Histericals meet at Sandown a few weeks back was his first run with the new external pickup and the M3 windage tray and both worked a treat. Oil pressure is great under all conditions and the lack of and temps are really good because the oil is no longer full of air which means the heat transfer to the cooler is what it should be!
See ya Saturday.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users