. Posted January 4, 2011 Share Posted January 4, 2011 I have the following parts for sale. All items are on the north side of Brissy and I am happy to arrange postage for most (except the larger items). Let me know if you need photos. Please PM me with any offers: L28 short motor (Spins freely but I have not had it running. Local pickup only) 280zx S1 brake lights 260z brake lights 280zx Aunger rear hatch louver 260z seats (no rips) Electronic distributor (needs a clean and I suggest new bearings) R180 open diff (local pickup only) R200 open diff (local pickup only) S30 R200 moustache bar S30 Half shafts Set of 4 260z original alloys (In good condition but the inset part of each wheel has been painted yellow) Set of 5 280zx S1 alloys (in good condition, includes centre caps) Old school steering wheel and BOSS to suit s30 or s130 S30 radiator grill (not perfect but certainly presentable / repairable) Plastic brake light cover/trim for a 260z 2+2 (The part from inside the hatch. all three Good condition) Quote Link to comment Share on other sites More sharing options...
brianz Posted January 4, 2011 Share Posted January 4, 2011 PM sent concerning seats, brake lights and mags. Brianz Quote Link to comment Share on other sites More sharing options...
gilltech Posted January 6, 2011 Share Posted January 6, 2011 Could you provide prices for the 260Z parts not already sold? Thanks. Quote Link to comment Share on other sites More sharing options...
Jimbo Posted January 7, 2011 Share Posted January 7, 2011 G,day Greg, I will grab the electronic distributor, Will PM you for detail thanks..jim.. Quote Link to comment Share on other sites More sharing options...
260DET Posted January 7, 2011 Share Posted January 7, 2011 I'm up for a spare set of series 1 rear lights Greg if you have them, no hurry. Quote Link to comment Share on other sites More sharing options...
singhy Posted January 7, 2011 Share Posted January 7, 2011 hey mate wat sorta steering wheel is it? factory? Quote Link to comment Share on other sites More sharing options...
luvdemzeds Posted January 8, 2011 Share Posted January 8, 2011 Hi,does the r180 have the circlip or the bolt on for the drive shafts? Regards Quote Link to comment Share on other sites More sharing options...
Jimbo Posted January 8, 2011 Share Posted January 8, 2011 G,day Greg, I will grab the electronic distributor, Will PM you for detail thanks..jim.. G,day Greg... Did you get my PM..Thanks Jim Quote Link to comment Share on other sites More sharing options...
bullzed Posted January 8, 2011 Share Posted January 8, 2011 Hey mate, If the hatch louvre has the clips I'll take that off your hands Cheers Zac Quote Link to comment Share on other sites More sharing options...
gilltech Posted January 8, 2011 Share Posted January 8, 2011 Hi Galderdi, I'll take the R200 diff, bar & 1/2 shafts, & 260Z brake (tail?) lights, if they're still available. I'm also Brisbane north-side & am on holidays at present so can collect. Regards, John Quote Link to comment Share on other sites More sharing options...
zeds4ever Posted January 9, 2011 Share Posted January 9, 2011 Hey Greg , don't forget the plastic retaining clip for the chrome cover thingo. Put that in the will to. What sort of flowers do you like. LOL. Regards :Alan. Quote Link to comment Share on other sites More sharing options...
gilltech Posted January 9, 2011 Share Posted January 9, 2011 No problem Greg, thanks for the update, all the best. John. Quote Link to comment Share on other sites More sharing options...
Zed Brothers Inc Posted January 9, 2011 Share Posted January 9, 2011 Hi Greg, FYI, That steering wheel is off a 200b SX, got one on my 260z. Cheers Magnus Quote Link to comment Share on other sites More sharing options...
Brabham Posted January 12, 2011 Share Posted January 12, 2011 What ratio was the R200? Cheers. Quote Link to comment Share on other sites More sharing options...
Brabham Posted January 14, 2011 Share Posted January 14, 2011 If you can bring the R200 down with you I will take it, are you able to check the ratio? The easy way to do this without opening it is to turn the flanges around and mark their position in relation to each other with chalk. I.e. turn the half shaft flanges around until the tail shaft flange does one rotation, the half shaft flanges should rotate 3.9 times. Also do you have a pic? Cheers. Quote Link to comment Share on other sites More sharing options...
zeds4ever Posted January 15, 2011 Share Posted January 15, 2011 Hey Greg, don't worry abt the plastic cover for arm rest, etc. Found one amongst my odds & ends . Hoping to get rest from Bigfella. Regards : Alan Quote Link to comment Share on other sites More sharing options...
gilltech Posted January 17, 2011 Share Posted January 17, 2011 I think if the R200 is out of a manual 260 then the ratio would be 1:3.7 Quote Link to comment Share on other sites More sharing options...
Jimbo Posted January 20, 2011 Share Posted January 20, 2011 G,day Greg, The dizzy turned up this morning...Great....Thanks mate..Jim Quote Link to comment Share on other sites More sharing options...
vrocious Posted January 20, 2011 Share Posted January 20, 2011 Hey mate, will you separate the motor? I'm after a crankshaft pulley Quote Link to comment Share on other sites More sharing options...
Funkysandwich Posted January 25, 2011 Share Posted January 25, 2011 Have you still got the 260Z 2+2 door cards? Quote Link to comment Share on other sites More sharing options...
bluey1937 Posted February 3, 2011 Share Posted February 3, 2011 I have the following parts for sale. All items are on the north side of Brissy and I am happy to arrange postage for most (except the larger items). Let me know if you need photos. Please PM me with any offers: L28 short motor (Spins freely but I have not had it running. Local pickup only) 280zx S1 brake lights 260z brake lights 280zx Aunger rear hatch louver 260z seats (no rips) Electronic distributor (needs a clean and I suggest new bearings) R180 open diff (local pickup only) R200 open diff (local pickup only) S30 R200 moustache bar S30 Half shafts Set of 4 260z original alloys (In good condition but the inset part of each wheel has been painted yellow) Set of 5 280zx S1 alloys (in good condition, includes centre caps) Old school steering wheel and BOSS to suit s30 or s130 S30 radiator grill (not perfect but certainly presentable / repairable) Plastic brake light cover/trim for a 260z 2+2 (The part from inside the hatch. all three Good condition) Quote Link to comment Share on other sites More sharing options...
bluey1937 Posted February 8, 2011 Share Posted February 8, 2011 Hi Mate, I need:- (1) 260 zx windscreen; and (2) Rear Window louvre. Can pick up Wednesday 9th February or weekend. Please phone me @ 07 5478 6633 Thanks Bluey Tyler Quote Link to comment Share on other sites More sharing options...
Premo 264z Posted February 13, 2011 Share Posted February 13, 2011 Any chance of door cards delivery price to SA 5252? Quote Link to comment Share on other sites More sharing options...
stevofoxono Posted June 3, 2011 Share Posted June 3, 2011 digging up abit of a old thread but still have the louvre mate? Quote Link to comment Share on other sites More sharing options...
stevofoxono Posted June 4, 2011 Share Posted June 4, 2011 ok no worries Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.