Jump to content

New wheel spacers with hub-centric sleeves


BenZed

Recommended Posts

We have just received stock of our new hub-centric spacers. These are made from 6160-T6 aluminium for great strength and are available with a variety of hub spacers to retain the wheel-centering characteristic of the original hub. The spacers themselves are 20mm thick and come in four or five stud with 1.25 or 1.5 pitch studs, all 114.3 PCD. The spacers are $159 a pair by themselves, the hub-centric sleeves are $36 a pair.

post-853-144023565943_thumb.jpg

Link to comment
Share on other sites

These spacers are a good thing. My Y30 wheels on my P330 were a little 'inboard' and didn't fill the guards properly.

 

I bought spacers that were 20 mm thick for the front and back, thought initially that it may not be enough and put the wheels back on to find that the whole look of the car had changed AND the tyres don't scrub at all. The wider track has also given the car a better handling feel.

 

A good, simple and effective mod. I think.

 

(Stock Datsun studs are 1.25 pitch and the acorn nuts can be hard to find if you need extra for whatever reason).

 

Cheers.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...