jalexquijano Posted February 24, 2018 Share Posted February 24, 2018 Installed long needle valve and seat in front bowl and short in rear carb bowl, set the gap to .55 inches and tuned it to 2.5 turns clockwise. Engine stumble and falls. Increased to 3.5 turns clockwise and it backfires through intake. Could one of the neddle and seat fastened at the bowls be damaged?? This is not normal. My electric pump is brand new and is measuring 3 psi. Quote Link to comment Share on other sites More sharing options...
Cozza Posted February 24, 2018 Share Posted February 24, 2018 Sounds lean. Try screwing the seat at the base of the carb needle down a little more. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.