LLN260Z Posted February 18, 2018 Share Posted February 18, 2018 I picked up a set of 240z su carbs. I was given the fuel lines too but they look soo rusty. Where can I take them to get it looking better again. Prefer the carbs and mani to look good again as well. Located in Craigieburn Can be near Blackburn north during work hours. Quote Link to comment Share on other sites More sharing options...
C.A.R. Posted February 18, 2018 Share Posted February 18, 2018 (edited) http://www.woodyshydroblast.com/ From this:To this: To get the steel fuel rail refurbished, you'll have to have re-plated.I recommend: https://www.yellowpages.com.au/vic/mordialloc/solar-plating-co-12534212-listing.html Edited February 18, 2018 by Lurch ™ LLN260Z, smugley and gav240z 3 Quote Link to comment Share on other sites More sharing options...
Cozza Posted February 18, 2018 Share Posted February 18, 2018 They look great Lurchos. Do they have a clear coat or something on them to give them protection against future oxidation. I soda blasted mine in the back yard. They came up heaps better than they were but nothing like Lurch’s set. Only cost $7 or so in bicarb and 5 mins of my time though. LLN260Z 1 Quote Link to comment Share on other sites More sharing options...
Administrators gav240z Posted February 18, 2018 Administrators Share Posted February 18, 2018 Water jet blasting sort of shot peens the surface so it's more resistant to oil impregnation etc.. So basically it cleans the surface nicely and then makes it more resilient against oil stains in future. Not sure about oxidation... God I wish you didn't sell those 50's Lurcho's! OdinZ and LLN260Z 2 Quote Link to comment Share on other sites More sharing options...
smugley Posted February 18, 2018 Share Posted February 18, 2018 +1 for Woodys I just had a set of 44 Mikuni's blasted and the service and finish is outstanding . LLN260Z and gav240z 2 Quote Link to comment Share on other sites More sharing options...
C.A.R. Posted February 18, 2018 Share Posted February 18, 2018 (edited) +1 for Woodys I just had a set of 44 Mikuni's blasted and the service and finish is outstanding . Ermahgerd! We are the coolest kids, Doug! Edited February 18, 2018 by Lurch ™ gav240z 1 Quote Link to comment Share on other sites More sharing options...
LLN260Z Posted February 18, 2018 Author Share Posted February 18, 2018 Thank you for the replies. I will get in contact with them Your carbs are soo tempting to get haha Quote Link to comment Share on other sites More sharing options...
aircobra Posted February 19, 2018 Share Posted February 19, 2018 try ferntreegully blasating found them to be just as good, but cheaper Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.