Jump to content


Photo

Azc Rear Brakes - Wilwood Mc4 Handbrake Add-On Kit


  • Please log in to reply
3 replies to this topic

#1 woza01

woza01

    Advanced Member

  • Members
  • PipPipPip
  • 105 posts
  • Location:Mandurah, Western Australia

Posted 09 February 2017 - 06:26 PM

Hey fellow Aussie Z Owners
 
I have previously developed, and sold kits to add a handbrake to the AZC kit, however due to limitations with the Spot Caliper, it was only partially successful.
 
Wilwood have now released a much improved Mechanical Caliper, and I am offering a kit to allow you to easily add a strong, reliable handbrake to your car (if it has the AZC Kit !)
 
So..I am ready now to start accepting deposits for your kits. 
 
* The Full Kit comprises of 2 Brackets (LH & RH), New Handbrake Cable, 2 e-clips, and 2 Brake Hose Retainers. 
 
* The Half Kit comprises of 2 Brackets (LH & RH), 2 Brake Hose Retainers.
 
* Full Kit price is AUD$555 + Paypal fee of 2.6%. Total of AUD$560 (postage excluded)
 
* Half Kit price is AUD$320 + Paypal fee of 2.6%. Total of AUD$323 (postage excluded)
 
NOTE : The Kits DO NOT include the Wilwood MC4 Calipers
 
Postage can only be confirmed once i have a set available to package and take to the post office, The brackets are made from 12mm Mild Steel plate, and the postage is calculated on weight....nothing i can do about this unfortunately.
 
So....here's is how i intend on working it...
 
I'm sure you all can appreciate that I cant take a hit by going ahead and getting all the plates and cables done, and then finding some people who ordered have changed their minds. So, i will do it exactly the same way as i did the last time. I will require a AUD$250 deposit, paid into my Paypal account. This will secure your set. Once the kits are ready, and I have confirmed shipping prices, you can pay the Balance, along with the shipping cost, and the brackets will be shipped to you. 
 
I appreciate some people may be uncomfortable with this, however it is designed to protect me from being left with merchandise. Feel free to read through the entire blog on the link below (hybridz), or here on AusZCar and you will see that I am trustworthy and true to my word. You will receive what you pay for, and, for piece of mind, all funds will remain in the Paypal account until the packages have been sent. 
 
 
I have been in touch with both the machinists, and the cable manufacturers, and due to their work loads, production can only start as of 13th March. Kits will be ready approximately 2 weeks after that.
 
So, this allows for plenty of time to build up the 10 orders required, and more if it so happens ! 
 
NOTE : Please do not wait till the last minute to place your order - the sooner you place your order, the sooner the '10 set' goal will be reached. From experience, last time, people were reluctant to put their money down, and it spooked others into the same frame of mind. So Rest Easy.... I will keep you fully updated as to the progress of the count.
 
IN SUMMARY.....
 
- 1st Payment of AUD $250 Confirms your order.
- 2nd Payment (Balance of Kit + Postage) will be due when Kit is ready for posting - You will be advised of postage price before this time.
 
Once you have paid your deposit, please PM me, with your FULL NAME, email address, and postage address. I will need these to get postage prices when the time comes.
 
My Paypal account is kwgilbert71@gmail.com
 
PS. If for some reason we cant proceed BEFORE manufacture...you will get your money back. Rest Easy !
 
I'm Happy to answer any questions.
 
Cheers
 
Warren
 
 
THE FINE PRINT - PLEASE READ CAREFULLY !
 
* If for some reason we cant proceed BEFORE manufacture...you will get your money back. Rest Easy !
* This kit is designed to work with the existing rear AZC Kit. The seller makes no assumptions that it will fit with any other manufacturers kits.
* A small modification (detailed above) may be required to your car.
* If you change your mind AFTER production has started, your deposit may be forfeited. Please be 100% sure when ordering.
* This kit is designed for Off-Road Use only. By fitting this kit you acknowledge all terms, and absolve the seller of all liability if something goes wrong.

Attached Thumbnails

  • WZC 1.jpg
  • WZC 2.jpg
  • WZC 3.jpg

Edited by woza01, 09 February 2017 - 06:31 PM.


#2 600Z

600Z

    Advanced Member

  • Members
  • PipPipPip
  • 253 posts
  • Location:Tasmania

Posted 09 February 2017 - 08:43 PM

Hi Warren,

Sorry but a bit off the subject though I do have the Elwood brake setup thought I'm running a different setup for the handbrake.

But I was wondering from your pictures what companion flanges are fitted to the axle?

Regards,
Justin

#3 woza01

woza01

    Advanced Member

  • Members
  • PipPipPip
  • 105 posts
  • Location:Mandurah, Western Australia

Posted 09 February 2017 - 11:24 PM

Hi Warren,

Sorry but a bit off the subject though I do have the Elwood brake setup thought I'm running a different setup for the handbrake.

But I was wondering from your pictures what companion flanges are fitted to the axle?

Regards,
Justin

 

Gday Justin,

 

Ah ok....I'm not familiar with the Elwood setup !

 

And in regards to the companion flange, it was part of the CV conversion kit I purchased from Stewart Wilkins Motorsport.

 

Cheers & thanks for looking

 

Warren



#4 600Z

600Z

    Advanced Member

  • Members
  • PipPipPip
  • 253 posts
  • Location:Tasmania

Posted 11 February 2017 - 10:12 AM

No problem thanks Warren.

And should say Wilwood lol

Justin

Edited by 600Z, 11 February 2017 - 10:13 AM.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users