Jump to content


Photo

For Sale 240Z #710


  • Please log in to reply
22 replies to this topic

#1 Dandaman

Dandaman

    Advanced Member

  • Members
  • PipPipPip
  • 40 posts
  • Location:Adelaide
  • Tagline:New Member

Posted 27 November 2016 - 03:09 PM

Hi guys

 

Im selling my 240z HS30-00710 with matching numbers and 5-speed manual gearbox, dual hand throttle/choke.

 

Listed on Gumtree today (should be up in a couple of hours per the website)

Asking price is $15K

Located in Park Holme, South Australia.

 

Model: 240z

Location: Park Holme, SA
Price and Payment Conditions: $15,000 cash in hand
Item Condition: Fair
Body: Rust in hatch sill panel, dog legs, floor pans, battery tray
Mechanical: Requires towing
Registration: No
Engineers Certificate: Not applicable
Contact Details: PM for contact details

 

 

In 2011 the engine was rebuilt by JH Southcott, shock absorbers and bushes were replaced, and a new alternator fitted. Standard manifold has been swapped for a header, everything else is stock.

 

She has been in storage for a couple of years now and I don't think i will be able to give her the time to get her back on the road again. A new battery and a review of the engine loom would be needed to get her running again.

 

Rust is in the usual places (hatch sill panel, dog legs, floor pans, battery tray).

 

I also have numerous spare parts (hatch, bonnet, doors, door cards, original fender mirrors, headlight cover kit, seats, gearbox, spoiler + more) and would be happy to part with them all for an extra $1500 to the buyer of the car.

 

PM me for contact details.

 

Daniel

 

IMG_0635.JPG IMG_0637.JPG IMG_0631.JPG IMG_0636.JPG

Attached Thumbnails

  • IMG_0629.JPG
  • IMG_0630.JPG
  • IMG_0628.JPG

Edited by Dandaman, 27 November 2016 - 03:16 PM.

  • gav240z, datoman and NGDCTeam like this

#2 datoman

datoman

    Member

  • Members
  • PipPip
  • 27 posts
  • Location:Adelaide
  • Tagline:New Member

Posted 27 November 2016 - 03:34 PM

hey man check your PM



#3 NGDCTeam

NGDCTeam

    Member

  • Members
  • PipPip
  • 25 posts
  • Location:Penrith/Japan
  • Tagline:Z Concept

Posted 27 November 2016 - 03:38 PM

So refreshing to see a honest good deal for that price. ^-^

If only this was in NSW area!

 

Hope it goes to someone who will take good care of it and doesn't sell it  for triple the cost  down the track (without a good amount of work put in)



#4 GongZ

GongZ

    Senior Member

  • Members
  • PipPipPipPipPip
  • 811 posts
  • Location:Wollongong NSW
  • Tagline:Watanabe wannabe

Posted 27 November 2016 - 03:40 PM

The Gumtree listing is now active.

 

http://www.gumtree.c...oupe/1131083103


Edited by GongZ, 27 November 2016 - 03:42 PM.

  • datoman likes this

#5 gav240z

gav240z

    Administrator

  • Administrators
  • 12,394 posts
  • Website:http://www.viczcar.com
  • Location:Sydney NSW
  • Tagline:Jack of all trades, master of none.

Posted 27 November 2016 - 03:42 PM

Daniel:

 

I also have numerous spare parts (hatch, bonnet, doors, door cards, original fender mirrors, headlight cover kit, seats, gearbox, spoiler + more) and would be happy to part with them all for an extra $1500 to the buyer of the car.

 

 

I'll send a PM re: this lot.



#6 gav240z

gav240z

    Administrator

  • Administrators
  • 12,394 posts
  • Website:http://www.viczcar.com
  • Location:Sydney NSW
  • Tagline:Jack of all trades, master of none.

Posted 27 November 2016 - 03:47 PM

So refreshing to see a honest good deal for that price. ^-^

If only this was in NSW area!

 

You can get the car transported to NSW. Cost me about $1000 AUD when I did it with HS30 00150.



#7 NGDCTeam

NGDCTeam

    Member

  • Members
  • PipPip
  • 25 posts
  • Location:Penrith/Japan
  • Tagline:Z Concept

Posted 27 November 2016 - 03:51 PM

You can get the car transported to NSW. Cost me about $1000 AUD when I did it with HS30 00150.

True, but i tend to go about and have a look before i buy something,  slow method i know, but it saved me last time.

Though this looks way better than the lot i was looking at for a way better price!



#8 gav240z

gav240z

    Administrator

  • Administrators
  • 12,394 posts
  • Website:http://www.viczcar.com
  • Location:Sydney NSW
  • Tagline:Jack of all trades, master of none.

Posted 27 November 2016 - 03:54 PM

I bought HS30 00150 unseen, I really just went on gut, but I had a couple of members in SA give me a bit of information about the car. The way the market is you really just have to take a punt and be prepared for what restoration will involve.

 

Of course I do think it's possible many are jumping in for fear or missing out also and perhaps buying cars that are far worse than advertised so obviously be careful, but this has a lot going for it, relatively complete car which looks original and has matching # engine and a relatively low build #.

 

But of course everyone has a different appetite for risk.


  • NGDCTeam likes this

#9 datoman

datoman

    Member

  • Members
  • PipPip
  • 27 posts
  • Location:Adelaide
  • Tagline:New Member

Posted 27 November 2016 - 04:04 PM

The Gumtree listing is now active.

 

http://www.gumtree.c...oupe/1131083103

 

Prepared to be bomb!

 

;)



#10 Simestime

Simestime

    Advanced Member

  • Members
  • PipPipPip
  • 85 posts
  • Location:Brisbane
  • Tagline:New Member

Posted 27 November 2016 - 04:41 PM

Im sceptical on how new the id plate is,as you can buy them stamped with whatever numbers on ebay.and the stamping on the firewall looks dodgy.
Just my 2 cents.

#11 gav240z

gav240z

    Administrator

  • Administrators
  • 12,394 posts
  • Website:http://www.viczcar.com
  • Location:Sydney NSW
  • Tagline:Jack of all trades, master of none.

Posted 27 November 2016 - 05:04 PM

Im sceptical on how new the id plate is,as you can buy them stamped with whatever numbers on ebay.and the stamping on the firewall looks dodgy.
Just my 2 cents.


I've observed quite a few over the years and I have no reason to believe it's dodgy, not only that but the engine no. matches the build date of a 71 AU delivered 240z.

I've started to collect photos of very early ones in particular to observe the alignment and kerning / spacing of them.
https://goo.gl/photo...tZEsmnqrkStLPG9
  • NGDCTeam likes this

#12 Rickers

Rickers

    Advanced Member

  • Members
  • PipPipPip
  • 105 posts
  • Location:Melbourne, Australia

Posted 27 November 2016 - 05:17 PM

If you're willing to separate, I'm in need of a hatch and a pair of doors.

 

GL with sale.



#13 dat240z

dat240z

    The 1000+ club

  • Members
  • PipPipPipPipPipPip
  • 1,110 posts
  • Location:Canberra
  • Tagline:RB25det powered 240z - willwoods - coils - engineered

Posted 27 November 2016 - 05:27 PM

Dibs on the Fender Mirrors fellas!! 



#14 Simestime

Simestime

    Advanced Member

  • Members
  • PipPipPip
  • 85 posts
  • Location:Brisbane
  • Tagline:New Member

Posted 27 November 2016 - 06:16 PM

Fair call gav,i mean no disrespect to the seller at all.
Just something for impulse buyers to watch for thats all.theres been so many cut n shut jobs over the years and people seem to forget about that when buying unseen.

#15 Dandaman

Dandaman

    Advanced Member

  • Members
  • PipPipPip
  • 40 posts
  • Location:Adelaide
  • Tagline:New Member

Posted 27 November 2016 - 06:28 PM

Thanks for the interest guys, #710 has been sold.

 

Best wishes to the new owner, I'm sure he will give her the attention she needs.

 

I think it will be a few years yet before i can pickup another project Zed, hopefully they won't be out of my reach by then.


  • George likes this

#16 MichaelT

MichaelT

    Advanced Member

  • Members
  • PipPipPip
  • 73 posts
  • Location:Brisbane
  • Tagline:S30103679

Posted 27 November 2016 - 07:57 PM

Dibs on the Fender Mirrors fellas!! 

PM'd him at 3:30pm



#17 Cliff

Cliff

    Advanced Member

  • Members
  • PipPipPip
  • 87 posts
  • Location:Brisbane
  • Tagline:Donuts!!

Posted 27 November 2016 - 11:26 PM

Congrats on sale!  Good buy for whomever the lucky buyer is.  I was thinking of selling one of my 73 240's but not so sure after seeing this sale.



#18 260z blues

260z blues

    Advanced Member

  • Members
  • PipPipPip
  • 87 posts
  • Location:Sydney

Posted 28 November 2016 - 06:36 PM

That was quick.
I better start paying more attention lol

#19 dat240z

dat240z

    The 1000+ club

  • Members
  • PipPipPipPipPipPip
  • 1,110 posts
  • Location:Canberra
  • Tagline:RB25det powered 240z - willwoods - coils - engineered

Posted 28 November 2016 - 08:38 PM

PM'd him at 3:30pm



It's irrelevant now but good effort considering the ad only came up @ 4.09pm!!.

#20 GongZ

GongZ

    Senior Member

  • Members
  • PipPipPipPipPip
  • 811 posts
  • Location:Wollongong NSW
  • Tagline:Watanabe wannabe

Posted 28 November 2016 - 08:45 PM

It's irrelevant now but good effort considering the ad only came up @ 4.09pm!!.

 

I wondered about that too - until I realised that MichaelT is in Queensland and therefore not on daylight savings time  :)


  • andyk_79 likes this




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users