Zedstar Posted January 29, 2016 Share Posted January 29, 2016 All my welds are done with a gasless mig you have just got to know how to use it. Dont get me wrong a mig welder with gas is great and comes out mint. Get some mild steel sheet and practice if I get a chance this weekend I will see if I can make a small video on welding with gasless. I love 918 Kalahari Tan, so you can't go wrong there. In terms of blue I like the factory blue as seen on Kats car. (So glad we didn't get the door buzzers here).https://www.youtube.com/watch?v=eP9c1PAW_00 Or Tony's ! Quote Link to comment Share on other sites More sharing options...
mossy Posted January 30, 2016 Share Posted January 30, 2016 918 is a top choice Jeff, even though I went with porsche signal orange, 918 was my first choice and in looking back I wish I did go with that colour. Quote Link to comment Share on other sites More sharing options...
Moderators PB260Z Posted January 30, 2016 Moderators Share Posted January 30, 2016 Hi Jeff Just paint it the colour YOU want. For me I always wanted a 305 Blue Bus with Black interior and gold Simmons wheels, and no one was going to change my mind (this time ) Cheers PB Quote Link to comment Share on other sites More sharing options...
jeff43 Posted January 31, 2016 Author Share Posted January 31, 2016 918 is a top choice Jeff, even though I went with porsche signal orange, 918 was my first choice and in looking back I wish I did go with that colour. Very interesting to know that Mossy. I have wanted to copy you with the Porsche signal orange for a while, I had only recently decided it should be 918 orange to keep with the originality theme. I was even looking at FG Falcon "octane orange which looks pretty similar to the other 2 oranges. Your comments just make it easier to stick with 918 orange. Hi Jeff Just paint it the colour YOU want. For me I always wanted a 305 Blue Bus with Black interior and gold Simmons wheels, and no one was going to change my mind (this time ) Cheers PB Hi PB. Have no fear I will paint it whatever colour I like, the only problem is I like quite a few colours. For me 918 orange is a nice safe choice that I know I wont regret. I do differ from you though as I have never wanted a bus, always preferred the 2 seater shape. Each to their own, Love is in the eye of the beholder. Quote Link to comment Share on other sites More sharing options...
jeff43 Posted February 15, 2016 Author Share Posted February 15, 2016 Been a bit slow on the car of late as I have been doing some painting on a friends motorcycle parts to get some gun practice in preparation for painting the Zed. I got a free afternoon on the weekend and spent the time filling in the hole where the radio antenna goes. There was also 6 drill holes in the LH rear QTR that I needed to fill in. They are in a straight line but I have no idea why they would have been there. Anyway they are welded up now. Quote Link to comment Share on other sites More sharing options...
Administrators gav240z Posted February 15, 2016 Administrators Share Posted February 15, 2016 No idea what those other holes were for, definitely not standard. Good work on filling them though. Quote Link to comment Share on other sites More sharing options...
taylor Posted February 15, 2016 Share Posted February 15, 2016 It had a vinyl roof ! Quote Link to comment Share on other sites More sharing options...
jeff43 Posted February 15, 2016 Author Share Posted February 15, 2016 Thanks for that, you are a genius Taylor. I had never seen one with a vinyl roof before but google was my friend and you are absolutely right. Looks like there was a couple of styles as well Quote Link to comment Share on other sites More sharing options...
Administrators gav240z Posted February 15, 2016 Administrators Share Posted February 15, 2016 So horrible, I once looked at a wine red 260z 2+2 with a black vinyl roof. About 16-17 years go now. The car was ok but the reason we didn't buy it was because of the vinyl roof . I wonder which dealer was responsible for it. Quote Link to comment Share on other sites More sharing options...
jeff43 Posted February 15, 2016 Author Share Posted February 15, 2016 (edited) There was a discussion about vinyl roof's here http://www.viczcar.com/forum/topic/1605-240z-with-the-vinyl-roof Not my cup of tea that's for sure and even with all this talk of originality there is no way a vinyl roof is going back on the car. As for rust underneath the vinyl, my car is exceptionally rust free in the area where the vinyl roof was fitted. Maybe a previous owner did the only logical thing and had it removed early in the cars life. Edited February 15, 2016 by jeff43 Quote Link to comment Share on other sites More sharing options...
taylor Posted February 15, 2016 Share Posted February 15, 2016 (edited) My 71 in my avatar had a vinyl roof as well, Buy the way Gav 789 is the chassis number. Edited February 15, 2016 by taylor gav240z 1 Quote Link to comment Share on other sites More sharing options...
jeff43 Posted February 21, 2016 Author Share Posted February 21, 2016 Hi All, I like to think I've had a productive week on the car. I will let the pictures do the talking. Finished the day off on a good note. mother240 and George 2 Quote Link to comment Share on other sites More sharing options...
Andrew_L26 Posted February 21, 2016 Share Posted February 21, 2016 It's looking fantastic Jeff! If it was me and had my z down to bare metal like that I'd probably just clearcoat it so I could truly enjoy that rust free goodness As for the Vinyl roofs. They look ok (better then primer (well on my z anyway)) Quote Link to comment Share on other sites More sharing options...
Moderators PB260Z Posted February 22, 2016 Moderators Share Posted February 22, 2016 Hi Jeff A most productive week indeed, and heading in the right direction. The body is looking good. Cheers PB Quote Link to comment Share on other sites More sharing options...
jeff43 Posted February 22, 2016 Author Share Posted February 22, 2016 Hi Jeff A most productive week indeed, and heading in the right direction. The body is looking good. Cheers PB Thanks PB, feeling pretty good about how the body is turning out. I took all of the taping up newspaper off tonight and gave it a quick block down rub where I have a few imperfections and it looks like 90% of the imperfections will block out in the DTM primer I am using. I will try and get all of the seam sealer work around the hatch slam panel and roof seams, then finish all the metal prep work around the tail lights and hatch area and hopefully prime all that this weekend. the LH rear quarter lines are nice and sharp as it was in good condition under the previous paint. The Rh rear quarter is not so good and it will be a challenge to get the body lines just as sharp. Classicman and mother240 2 Quote Link to comment Share on other sites More sharing options...
Sirpent Posted February 22, 2016 Share Posted February 22, 2016 Jeff Nice work Buddy, to get the lines right, load up more primer on the lines, afterwards, triple tape below the line and use a black guide coat and at 45 degree strokes towards the tape line block the primer back. Then tape above the line again and again 45 degree block stokes to the tape line. Once you are done you should end up with a black guide coat pencil like line. Gently work over it with a soft block and you should end up with a perfect line that you can feather to the correct contour. Quote Link to comment Share on other sites More sharing options...
jeff43 Posted February 22, 2016 Author Share Posted February 22, 2016 Jeff Nice work Buddy, to get the lines right, load up more primer on the lines, afterwards, triple tape below the line and use a black guide coat and at 45 degree strokes towards the tape line block the primer back. Then tape above the line again and again 45 degree block stokes to the tape line. Once you are done you should end up with a black guide coat pencil like line. Gently work over it with a soft block and you should end up with a perfect line that you can feather to the correct contour. Thanks for the tip John. I will try it out shortly and let you know how I get on. Quote Link to comment Share on other sites More sharing options...
jeff43 Posted March 2, 2016 Author Share Posted March 2, 2016 Update time. So I have been getting the hatch area, the rear valance and tail light area, the area around the front windscreen and the roof channels all back to bare metal and prepped for paint. Then I got a chance to put a coat of KBS rustseal on those same area's. Did I mention I love KBS rustseal. Quote Link to comment Share on other sites More sharing options...
jeff43 Posted March 21, 2016 Author Share Posted March 21, 2016 Hi All, It has been a while since anything of note has happened on the car. Last weekend I got the passenger door all prepped for paint inside and out. I then painted the inside and frame in KBS rustseal. Then today I got both door skins prepped for paint. Then primed them both up. George and Ponyo240z 2 Quote Link to comment Share on other sites More sharing options...
Sirpent Posted March 21, 2016 Share Posted March 21, 2016 Keep it up Jeff, good work Quote Link to comment Share on other sites More sharing options...
jeff43 Posted March 24, 2016 Author Share Posted March 24, 2016 I have locked in my colour choice for my car. I figured if I by 4L of it then I will be committed and can stop changing my mind. I am very happy with my choice. It is a modern colour, however I believe that being a solid colour and being sprayed in 2-pack with no clear it will look period correct. So for your viewing pleasure here it is, Mini Volcanic Orange. From the Net And on the kitchen table - the wife wasn't home!!!!!!!!! Ponyo240z and George 2 Quote Link to comment Share on other sites More sharing options...
George Posted March 24, 2016 Share Posted March 24, 2016 Good stuff Jeff. It will be flatter than on that Mini right? Looks to be in between 918 and 920. Quote Link to comment Share on other sites More sharing options...
jeff43 Posted March 24, 2016 Author Share Posted March 24, 2016 Good stuff Jeff. It will be flatter than on that Mini right? Looks to be in between 918 and 920. Hi George, I think it will be a bit flatter than the mini, I expect they paint them clear over base. I was thinking exactly the same thing - somewhere between 918 and 920. Vaughn reckons his 920 and this one will look great together, I think they may attract some attention. gav240z and vorn70 2 Quote Link to comment Share on other sites More sharing options...
Administrators gav240z Posted March 24, 2016 Administrators Share Posted March 24, 2016 I've noticed that Fiat has a colour on their 500's. It's called Fiat 500 colour therapy yellow or something.. What's old is new again. It should look good in that shade. Quote Link to comment Share on other sites More sharing options...
Brabham Posted March 24, 2016 Share Posted March 24, 2016 Looks good Jeff. Very similar to the McLaren papaya orange, nice 70's color. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.