Jump to content


tie rods as per instructions

  • Please log in to reply
No replies to this topic

#1 zcar63


    Advanced Member

  • Donating Members
  • PipPipPip
  • 94 posts
  • Location:Brisbane
  • Tagline:New Member

Posted 26 December 2014 - 03:52 PM

Hi All
Made a pair of custom tie rods as per Whittie's instructions( A BIG thanks to you Whittie),also knocked up a pair of front adjustable control arms a few weeks ago .The control arms are mounted through the original holes in the cross member.I have some bumpsteer spacers, but the angle of the control arm and steering arm look good to me,so the spacers can stay in the packet.The car is on full droop  ATM i might remove the coil spring to see the full travel just to be sure.I can't find any inner steering arms of the left hand variety and hints would be good.
Cheers David

Attached Thumbnails

  • 43944_2e9f6a9bc0370a579a87af5b05f4a3b95c92da00.jpg
  • 43942_2ceb2111c6d1098e4dd14fb808ae969ee4ba9d1d.jpg
  • 43940_a062ffe1791929778f95f23f6a715df910e13934.jpg
  • 43938_16c8b17a515d3821166ac9c23058742ba1e27e46.jpg

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users