Vic Dyno Hire Posted December 21, 2014 Share Posted December 21, 2014 I bought this car about 10 years ago It has an L28 with very early motec on it. I started the car 2 days ago for the first time in 8+ years and I had fogotten how good it sounds. Next step is to get a tailshaft made or found and check the tune. Hopefully club rego some time in 2015 and catch up with some of you on a cruise or two! Ill put up any pics, vids or progress that may be of interest. Quote Link to comment Share on other sites More sharing options...
ZED83 Posted December 21, 2014 Share Posted December 21, 2014 Hay simon, great to c you still have the Zed Owen Quote Link to comment Share on other sites More sharing options...
Vic Dyno Hire Posted December 21, 2014 Author Share Posted December 21, 2014 Cheers Owen, I'm glad I kept it now. Here is a vid from a couple of days ago when I started it after those 8 years of resting quietly. Quote Link to comment Share on other sites More sharing options...
ilbert Posted December 22, 2014 Share Posted December 22, 2014 sounds good mate ! Quote Link to comment Share on other sites More sharing options...
Vic Dyno Hire Posted January 11, 2015 Author Share Posted January 11, 2015 Finally had a tail shaft made. Just ran it up on the dyno as it was. Needs work, but its a good feeling to have it driving again. Just a short youtube clip. Quote Link to comment Share on other sites More sharing options...
Vic Dyno Hire Posted February 18, 2015 Author Share Posted February 18, 2015 Here is a printout of the Z output. It still needs to be tuned as you can see from the lambda trace! Quote Link to comment Share on other sites More sharing options...
d3c0y Posted February 18, 2015 Share Posted February 18, 2015 That's got a pretty stout engine in it, what's been done to it? Quote Link to comment Share on other sites More sharing options...
theremm Posted February 18, 2015 Share Posted February 18, 2015 That's got a pretty stout engine in it, what's been done to it? I'm intrigued Quote Link to comment Share on other sites More sharing options...
Vic Dyno Hire Posted February 18, 2015 Author Share Posted February 18, 2015 I bought the car as is, 10 years ago. All I do know is that it has 50mm throttle bodies and early 2 Group Motec. When I changed the gearbox I saw that it also has an ally flywheel and Sachs clutch. It also has an external feed to the side of the oil pump and a big Harmonic balancer. Internally, I don't have a clue. The head will have to come off soon to replace the gasket as it has a slight water weep out the side. I'll know a bit more then. Quote Link to comment Share on other sites More sharing options...
Vic Dyno Hire Posted July 24, 2016 Author Share Posted July 24, 2016 (edited) Just a few pics from last night. Looks like I may have sold it!! Pending a deposit Edited July 24, 2016 by Vic Dyno Hire Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.