16 & 17 inch Superlites from Performance Wheels
Posted 23 September 2005 - 01:29 PM
I'll be going the 16x8 & 16x10 combo personally.
Posted 25 September 2005 - 06:32 PM
thats fantastic news, id really be interested in some of 16s in superlites, 17s would be better, most likely by the time id be looking to buy 17s will be out anyway... haha
Thnaks for that sulio.... 10 on the rear is fat
Posted 25 September 2005 - 07:17 PM
I think if a few of us e-mail them with enquiries we can move the date along closer for the 16x10 to be manufactured. I have followed my phone enquiry with an e-mail questioning all of the above including offset availabilities.
VIC - Performance Wheels
42 Mickle Street
Dandenong VIC 3175
Victoria - Australia
Phone 03 9706 4244
Fax 03 9706 6922
Posted 26 September 2005 - 05:44 PM
Thankyou for your email
Yes we are releasing a 16 x 8 Superlite sometime in Nov / Dec it would roughly be around the 4 Negative offset
at this stage. As for the 16 x 10 we are not sure when we will start to make may still be atleast 12 months.
Man 12 months is too long to wait. C'mon fellas we gotta start hassling these guys with e-mails so they move this date forward. :wink: :wink: :wink:
Posted 30 September 2005 - 08:40 PM
I stuck my ZG flares on with masking tape to get an idea of how wide I can go. Looking at the front the 16x8 might not fill it out unless the offset is a crazy negative value of about -20 for the front to look right. A lot of the Watanabes you see with the ZG look are 16x8.5 offset -6 (or 16x9, -13) at the front, and 16x9.5 with -19 at the back. Bit of a shame those Wats would prolly set you back around AUD$3000.
Another option is to find a local 3 piece rim made to the exact offset mentioned above. I shopped around and found that I could get an ROH VENTURO rim in 16x9.0 & 16x9.5 made up for $410.00 per wheel usual price is $475.00.
The attraction of the 3 piece is that you can always get the outer section redone if you ever want to go back to wheels that fit the stock guards at a cost of about AUD$130 per wheel.
Watanabe wheel sizing page, Click on the ZG240 wheel set up to goto pics.
Posted 04 October 2005 - 05:12 PM
Posted 04 October 2005 - 06:38 PM
Posted 04 October 2005 - 08:42 PM
Posted 05 October 2005 - 12:30 AM
Posted 05 October 2005 - 05:39 PM
Posted 06 October 2005 - 03:00 AM
let me know asap once you got the flares on the Z, as i need to see if i like them on the car or not as im not sure what i want to do yet...
Posted 06 October 2005 - 08:10 PM
Yer gotta wait about 5-6 weeks for the wheels to be finished so I'll mount the flares as soon as I get wheels. Check out the car below with the 17 and ZG flares. I like the green.
Posted 06 October 2005 - 08:46 PM
I think he's on classiczcars.com as ON3GO.
I think Watanabe's would look better but yeah , your obviously getting Psyched about flares Sulio :twisted: .
Posted 06 October 2005 - 11:28 PM
Looking at the car above I just don't undersatand how anybody could look at that and not like it. My GF does'nt like the idea of flares, she nodded her head when I said I bought some flares for my datsun. I just think it needs to be seen in person to be fully appreciated.
Find out soon enough. Does'nt matter anymore anyway now that I have a 2nd Z thats a perfect example of a stock straight clean 240 with fresh paint and interior sitting in my garage. Ha and that one is red too!!!
Posted 07 October 2005 - 06:34 AM
Awesome dude. Where did you get the ZG flares from?
I just got 2nd hand Simmons B45s (16x8 and 16x7). Going up to the car tomorrow to fit them on.
Any of you lads going to the NDSOC Calder Sprint on Oct 31st?
Posted 07 October 2005 - 05:47 PM
Got the flares from a fella in SA who made up a mould and makes them when he has time. His name was Zkid located on www.classiczcars.com.
There is also ZR240, (Ashleigh), a member here you might already know that has an original set he brought back from Japan. I believe Ash was about to start making them. Try looking him up in the members section if you up for a set. I think there are a few fellas here looking for them.
I was looking for a set of 16" B45 Simmons. I thought for a reasonable price I could have got the outer made up to be a good size to suit the ZG flared look but I found it hard to find a set with correct offset and PCD to start with. I was told it would cost $150 a wheel to get the outer sections rolled. My calculations were that those Simmons would be hard to find for less than $800 a set 2nd hand if your really lucky and then theres the alterations. I guess you've been lucky enough to source a set or perhaps I'm just too impatient! hehe what ever the case I bet you can't wait to get them on and I look forward to seeing some pics. Will you widen the wheels if you mount flares on the car?
I'm away for the week of Oct 31st but if that changes I might consider going, still a bit far off to know.
Posted 08 October 2005 - 06:22 PM
Posted 09 October 2005 - 09:25 AM
I bought the 240 about 3 weeks ago. It was a car that sat with a panel beater I know for years and I dropped in too see him recently. I'd been bugging him over the year to see if he'd sell it to me seeing it had no rust and was very original. When I dropped in I noticed he'd recently painted it red again and the interior was still sitting next to it. He had leased half his factory out to a mechanic so he was pressed for space. So I offered to buy it again and he sold it to me. I have since got the dash reskinned, got new carpets bought new window seals to be fitted and pretty much got the interior looking very fresh . I've got the dash in but still to connect all the wiring, will do that next week. I don't think I will be able to afford to keep it seeing we've already got 3 cars at home and there's only the two of us so I'll put it up for sale in about a month.
Keeping it would be nice though, best of both worlds!!!
Posted 19 January 2006 - 05:04 PM
one of them even bagged out superlites :shock: and they both said that they only come in 16X7 atm and told me to get the tempest ones, i told them i was going to put flares on my car so would want wider rims and was happy going 3 peice but one place woudlnt give me an exact price on them and were rather unhelpful about which would be possible.
i'd have to say sulio you picked the nicest style thats there - i was quoted $480 per wheel...and then they started going on about how expensive and hard to find rubber would be in that width and they didn't seem keen on the stretching idea...
my interest in rim prices was sparked by these which i think i might get...which brake upgrades is it that require 16"? i've been looking through hs30z's gallery on classiczcars trying to see if 15" look ok but i dont know which ones are running 15's! but yeah they are a common tyre sizes (205/55/15 and 225/50/15) so might be the way to go, and in my quests to local jap importers for fender mirrors i came across http://www.techieonthemove.com/ and the guy there has a mad ae86 and is interested in getting a 240z [/url]
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users