Jump to content
Sign in to follow this  
PZG302

FHR (HANS) Devices becoming mandatory for CAMs events now....

Recommended Posts

Oh, btw, the FIA has not mandated that FHR items are to be utilised by the general club type sprinter, hillclimber, circuit racer, and dirt rally guts, anywhere in Europe, the UK, or the Middle East/Africa.

 

It's an optional thing, many at the top echelons of the sport do use them.

 

Why not further down,,,,,?

The FIA realise that the sheer numbers of competitors would simply dig heels in, and tell the Froggies to go jump.

 

Why Australia,? All to do with insurance premiums and reducing risk to insurance companies, thats simply it.

 

Old mate who runs Lakeside R/way in Qld, a teack CAMS refuses to be involved in, and is accredited as being a dangerous track, now due to zero upgrades in safety implementations, has reduced his expisure to risk, via insurance, by implementing a mandatory FHR requirement.

First old mate,,, then who jumps on the horsecart,,,, CAMS!

It's not an FIA mandate, they just offer testing, and other admin stuff.

 

Oh, and do we all know the difference between an AS1698 and a Snell rated helmet???

The AS1698 has flammable materials for the lining, Snell, does not allow that.

The rest of the helmet, is to the exact same minimum standards.

But CAMS wont allow a AS1698 to be used with FHR, as they are adopting the FIA testing, that have simply not tested AS1698 helmets,,,,,, ever!

Share this post


Link to post
Share on other sites

As FIA standards are used globally (with the exception of North America), following FIA makes it easier for race organisers, stewards and racers to just follow one particular set of safety standards... Imagine how long and complex scruitineering would take if CAMS picked and chose the safety standards that suit them best at one particular point in time.

 

Don't understand the point seeing that we have to comply with CAMS rules as laid out by them and only them. What country/body the rules originate from is irrelevant to us for that purpose.

Share this post


Link to post
Share on other sites

Hypothetically speaking, if everyone rocked up to race meetings and there were a hodge-podge of FIA/IMSA/SCCA/whatever safety certifications being accepted the amount of time that would be lost with scruitineers or officials pouring over rule books to ensure the car passes CAMS' minimum safety requirements would be unacceptable. CAMS is plenty bureaucratic enough as it is without significantly increasing the complexity of it's safety standards by accepting other codes and methods of certification outside of FIA.

Share this post


Link to post
Share on other sites

It wouldn't be like that at all, it would be the same as now. We as owners/drivers follow one set of rules, those imposed by CAMS. Or AASA for that matter.

Share this post


Link to post
Share on other sites

Unfortunately, there are many scrutineers around, that are so one-eyed, constrained, blinkered, etc, that unless you 100% comply, it's "sorry pal, you are out"

 

They often let a little badge, a yellow vest, or a blue shirt go to their heads far too often.

 

What would enamour a competitor far more, would be, a scrutineer  who took you quietly off to one side, explained things, and give you some grace or allowance,,,,, if you are trying to do, or been seen trying to do,, the right thing.

 

Unfortunately, this does no longer happen.

It used to, and when i was a scrut, i did this, quite often.

The last thing anyone wants is either a argumentative competitor, as well as a little Hitler, it stuffs it up for everyone.

 

All this talk above,,, why dont you form your own motorsport authourity or body, and do things the way you want to, without all this restriction, brick walls, or red tape.

Could'nt that hard, surely.

Share this post


Link to post
Share on other sites

I seem to have derailed this thread a bit with my ranting about the Lords in France, but what I was trying to say was if CAMS is mandating what is safe for us, surely they have an obligation to consider all safety options, particularly if that safety measure is "equal to, or better than" the CAMS prescribed measure. Hence my question about why not the USA model FHR as well as the HANS style.

Yes I agree we can't have a hotch potch of rules and regulations as that would be way too difficult to police. But what about a performance based regulation rather than a prescriptive one.

 

The Building Code of Australia allows you to pursue two options - the "deemed to comply" (prescribed) or the "alternative engineered solution" (performance based). The onus is on you to demonstrate to the powers that be, that your solution complies fully with the intent and meets or exceeds the prescribed solution. Let's take roll cages as an example. They are a finite structure. The CAMS manual is highly prescriptive about the design and installation. Application of finite element analysis can absolutely quantify structural integrity/strength of any prescribed cage in any vehicle within the confines of the class rules e.g.6 point not extending through the firewall etc.. A performance based approach could result in a stronger, safer, cheaper, lighter cage that does the same or better job. That's got to be good and if it's analysed by your engineer on a mandated analysis software to CAMS satisfaction what is the problem? This is becoming more pertinent with the introduction composites into production car manufacture. It seems ridiculous to bolt dirty black plumbing pipe into a McLaren MP12C, for example.

 

So if CAMS are serious about our safety they should be looking at ALL options, not just FIA mandated requirements.

Share this post


Link to post
Share on other sites

Quick heads up, as this site has no Sporting Affiliation with CAMS, ie is not a car club with affiliation, CAMS has no interest or compulsion to monitor the site.

However,,,,,

There are clubs with CAMS affil, that have websites/forums, with decent member number bases, that CAMS does actually monitor, and they, amazingly, sometimes listen to their members, and act.

Hence the recent amendment to the FHR rules recently re-written, allowing the short term use of some, not all, but some of the alternate FHR units.

 

The drama with SFI standards, as far as FIA goes, is the testing procedures are not the "same" and the dating of life of items is not the same.

 

ROPS ( cages) are a different ballgame, i strongly feel that the RPS unit should tie into front towers via firewall, and there should be more triangulation, less thicker heavier barring, but not all ROPS builders are conversant with FEA modelling or construction.

That then gives rise to the "cant teach old dog new tricks, or even change his spots" as far as the heirarchy and the way CAMS operates, or lays down their laws.

The FIA as well as the USA bodies, and even MSNZ, ARE flexible, will listen, and do sometimes "get" what their members/competitors are on about.

 

The recent diatribe from the new CAMS CEO, in regards to the top levels of motorsport in Aus, has very much peeved many people off, those at the grassroots, ie us lot.

But we are stuck with them, its a private club, you cant vote them out, or call for replacements.

 

Share this post


Link to post
Share on other sites

As an aside, i have jacked up at payingthe CAMS licence fee, and medical costs, to do just ONE pharquing race meeting in 2014

Some $450

I can pay $200 to QRO ( note this isnt AASA anymore) and race, not sprints, but door to door, at three "historic" intent meetings in 2014.

 

Why bother with CAMS?

They know there is an issue re members leaving, but it is a "local" ie Queensland thing, and do not care about losing a hundred or so members.

Share this post


Link to post
Share on other sites

Given I am not in oz and I have to follow MSNZ and their rules as Jason has pointed out they do appear to be a little flexible with regards to a number of things. FHR must conform to a recognize standard and those standards are the FIA one or SFI 38.1 they also allow a number of helmet standards.  We can build cages that tie into the front struts via the firewall (a good thing on the s30 as those struts are fair way forward and flex a bit. Given these mods were carried out by cage builders in the USA in the day we are good to do it today). We can build free form cages to alternate engineering specs outside what they have in their book but the engineering is such that you have to build a V8 supercar type cage. Having said that you can still have your cage built/puchased to the fia approval process and even if that is lesser than MSNZ requirements that does not matter if the fia sign off on it they accept it.

 

So we have a bit more flexibility here in NZ but with much smaller population and therefore pool of motorsport members/competitors then I guess they might have to be or numbers could be much smaller and less financial. These factors might be why we are lucky and have more flexibility.

Share this post


Link to post
Share on other sites

http://www.courts.qld.gov.au/__data/assets/pdf_file/0011/259724/cif-c-20140501.pdf

 

Sobering read.

It would seem some on here adopt opinions, with no basis of fact.

Nothing new. Opinionated types are all knowing fonts.

 

FIA may be in the background, but it would seem most likely CAMS has adopted a recomendation, based on the above findings.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×