Hi, i just put my dellortos on yesterday and today took them for a bit of a spin. So far some hesitation when you first put the pedal down. Running 2psi in fuel with a restricted return line.
I get a lot of popping but it gets better the more i open the fuel mixture. I have read to start with 2 1/2 turns out but im more like 4 turns out. heres a list of what i am running. I sometimes have to nurse it through the revs at the bottom end. If i was to cruise in 5th the motor would more likely die then rev out. it feels like its drowning a little down low.
All carbys have been balanced and a new set of plugs have been fitted.
extractors and elect dizzy:-
Idle holder/emmulsion tube 7850.1
main jets 132
air correctors 180
emmulsion tubes 7772.5
idle jets 45
air bleeds dont need to be restricted on my carbys
Acc pump jets 40
Is there anything that stands out to anyone?, which jet should i be looking at to improve my hesitation. Im not after super performance, just trying to get the best out of em with out spending big as these carbs are really for my next motor and most of the jets/chokes will get changed out of these.
BTW i love the induction sound