Jump to content

gerrardq

Members
  • Content count

    29
  • Joined

  • Last visited

About gerrardq

  • Rank
    Member

member details

  • Location
    Hobart Tasmania
  1. gerrardq

    Rb25 Box Required For L28

    The L28 I have had built isn't stock and I just want a straight forward Manual conversion that compliments the engine, the 260z is currently auto , the engine has Stage 2 Cam, flat top hypatec pistons, moly race rings, blue print, triple Mikuni 44s etc. Do all l series 71B boxes fit up to a L28 in a 260z without issue?
  2. gerrardq

    Rb25 Box Required For L28

    Thanks for the help so far, this is my first Datsun/Nissan and I am fairly clueless, Would I be right to assume from the comments that the RB20 box will bolt straight onto the L28 in a 260z 2+2 with no modification?
  3. gerrardq

    Rb25 Box Required For L28

    Thanks Greg, As I don't have anything but a auto box at the moment, would you be able to point me in the direction of a standard 5 spd?
  4. gerrardq

    Rb25 Box Required For L28

    I'm open to suggestions for other options but I'm told that a RB25 will be the optimum choice.
  5. gerrardq

    Water Pumps For L28

    Hi all, Looking to replace a water pump on the L28, is there anything more modern/reliable recommended or just run with standard? Thanks in advance, Gerrard
  6. gerrardq

    Rb25 Box Required For L28

    Hi all, Located in Tas, looking for a RB25 Manual box. Thanks in advance, Gerrard
  7. gerrardq

    240Z

    Much want! Depending on asking price, maybe a part trade for a convertible 260Z..... think about it..... kinda best of both worlds in a way
  8. gerrardq

    L28 engine

    This L28 came with the car, it turned but condition was unknown, it appeared to have never been apart before. It is now nearly ready to put in.
  9. gerrardq

    Radiator

    Hi all, Has anyone had any bad experiences with ebay aluminium radiators? is there a better product? I will be converting my Auto L26 to a Manual L28 with a fair bit of internal work. (Pic is what was in the Z) Any guidance would be appreciated. Cheers
  10. gerrardq

    Wtb Triple Mikunis, Inlet And Linkages.

    Thank you to 24OUNZ! The search is over, now to wait patiently for the engine to be ready!
  11. gerrardq

    Wtb Triple Mikunis, Inlet And Linkages.

    What would be a reasonable price for a triple inlet manifold and linkages if I have 40mm Solex Mikunis? I have found 4, 2 on a Toyota and 2 on a Mitsubishi, for what I have been told they are all matching.
  12. gerrardq

    Wtb Triple Mikunis, Inlet And Linkages.

    This forum is awesome! I am well out of my league with Z knowledge and I really appreciate the help, I understand now that the 50's are the holy grail but my build and budget will never justify them, Would I be correct in assuming a mildly worked L28 is going to be complimented best by 44's if wanting to run triple Mikunis? I have 2 complete engines, a L26 with N42 head and twin SUs and the other is a L28 with N42 and twin Hitachis, what's the thoughts on these Carbs and is the N42 the right head to work with?
  13. gerrardq

    Wtb Triple Mikunis, Inlet And Linkages.

    Thank you, I'm guessing it is difficult to find a matching one?
  14. gerrardq

    Wtb Triple Mikunis, Inlet And Linkages.

    Google has failed me when getting the image on a phone, whoops. I had in mind of spending up to $3k, $7.5k amazes me! Not interested in webers.
  15. gerrardq

    Wtb Triple Mikunis, Inlet And Linkages.

    $7,500 is ridiculous, thanks for the offer, I'm sure someone can see the value in them. Cheers Gerrard
×