Technical > Electrical systems

260Z 2+2 Starter Motor and Battery Earth Lead Wiring

(1/3) > >>

Brabham:
Hi guys, does anyone have a pic of the wires that run to their starter motor in a 2+2 260Z? How do I wire it up? I am reassembling my engine bay and wondering how to wire up the starter motor and where the battery earth lead and battery positive lead connect to. Thanks guys and merry Christmas. 

Scoota G:
This is My 75 260Z 2 seater. Should be the same.

Brabham:
Thanks heaps Scoota, exactly what I was after. :)

So both the positive and the negative use that same kind of black wire with a yellow trace, the positive having a shield over it and running to the starter solenoid and the negative bolts to the transmission housing, is that correct? Also what are the two other wires for that run to the starter? Presumably one is for the charge/volts, what about the other? Thanks. :)

Scoota G:

--- Quote from: Brabham on December 26, 2010, 11:22:03 AM ---Thanks heaps Scoota, exactly what I was after. :)

Also what are the two other wires for that run to the starter? Presumably one is for the charge/volts, what about the other? Thanks. :)

--- End quote ---

Yep that's right, as you see it in the pics. The other two wires should be bound together and one comes from the relay (big one near the Master Cylinder) and the small yellow and black one is for the ignition switch.

Brabham:
Installed :) :) :). Many thanks Scoota. And now I turn my attention to the alternator ;D

Would you have any pictures of the alternator wiring Scoota? Presumably again the 2 seater is the same as the 2+2? Also are you running an L26 or L28? Cheers and thanks for the help.

Navigation

[0] Message Index

[#] Next page