Hatch hinge rubber?

[mossy]

Wasn't someone making some of these, I can't seem to find the topic anywhere?

[Zedsabbath]

The topic is "Sydney 240 fan" in Introductions mossy

It's me who is making the rubber boots and I've nearly finished the right side mould, about another day and it'll be done, then I'll start on the left side mould

I'll post when they're finished, I've got the list of people on here who want a set and for the time being they will be made exclusively for those members and any other member here who orders a set....the reason being is that I can't mass produce them like sausages out of a sausage machine, I can only make one set a day or one set every other day if you know what I mean

[mossy]

Thanks for that,  I'm in the first batch so looking forward to the finished product!

[Z]

Hey Zedsabbath,
Could you put me down for a set too, I'll be sorting out the whole hatch area over the next month so keen to see the final product as well.

[Zedsabbath]

Yes just added you to the list Z

I keep forgetting to sign off as "Pete", must remember that from now on

A timeline for finishing the left mould would be about a month, maybe a little more, the right side one which took nearly 2 months, working on it an hour a night, but since I've gained the experience from making that one, the left mould will get done quicker

I'll be testing the right mould soon, then after I've inspected the first boot and tried it in my 240 for fit I'll post some photos

12 years has elapsed since I last made rubbers and metal castings, had to dig deep to remember a few tricks but they came back

With hinge boots there's a little preparation to do before you fit them, I'll post about that too but you can either fit them right or make a mess of it....one thing that needs looking at first up is the square openings the boots fit into, they must be free of burrs and corners of ill fitting panels, one of mine was like that so out came the file! filed it off 

Pete

[Z]

And here I was thinking it would just be a simple matter of pushing the rubber over the hinges! Nothing is as simple as it seems on these Z's sometimes - look forward to the tutorial Pete.
Casey

[NZeder]

can't believe I missed this - I have been looking for a supplier/set for over 10 years now my were missing after the cars first rebuild (PO could not find a supplier I would guess) and I took my car of the road 13 years ago - and I have been looking on an off for all that time.

[peter t]

+ 1 when you have them just PM

[Kent]

Can i get a set too?

much appreciated

Kent

[Zedsabbath]

Kent I'll put you on the list, I've finished the drivers side mould but there's been a delay in testing it because a digital scales I bought for weighing the liquid turned out to be a dudd so ordering another one this weekend...I can keep going though, starting to make the passengers side mould this weekend also

I used to use a set of kitchen scales years back, still got them but they're not accurate anymore so trying latest technology now...when I finally get a good digital one that is, the woes of buying cheap stuff, putting in a few more dollars this time to buy something decent

Pete

[Kent]

Thanks Pete,

i am in no hurry

[V8Datto]

Hey pete, put me down for a set of hinge rubbers if you can, (240z)

thanks

[Zedsabbath]

Got you down Datto, you're on the list....I managed to buy a decent digital scales today, visited all the retailers around here, Good Guys, Bing Lee etc but Big W had the only scales that fitted the bill...luckily the display one had batteries in it, I had a standard weight in my pocket and was able to test the scales accuracy, it was spot on....got a beautiful chrome base too, shaped in such a way it could almost be used in the Zed with a digital clock fitted

Gotta watch those other retailers though, some of their goods including their scales are way over priced...allowing for haggling I suppose but if customers are silly enough to pay the $70 to $100 for a small set of scales jazzed up with a bit of stainless steel, good luck to them

If all goes well I'll be pouring in the mould tomorrow, I'll post how it works out, these moulds are the most complex ones I've attempted yet, the only way I could plan them for easy separation from the finished rubber part was to make them in 5 parts, each mould

Pete

[nizm0zed]

im not really in the market for a set at the moment, but if you have someone pull out and have a set you need to move, pm me and i'll organise some cash.

If you end up doing a batch later on down the track, i'll be keen as then.
the bills have killed me lately.

[Zedsabbath]

No worries nizm0zed

Pete