Sins of the past - Genesis of a weekend warrior!

[dalee]

Stop giving him ideas Rob, you know Scoota will do it.

[FuzzyDropbear]

ha! I think everyone knows that I don't need to give Scoot ideas, he has enough of his own... Still waiting for that Aussie flag idea to randomly show up in this thread.. 

When I've been to your house, I've seen the way he looks at Orange (that twinkle gets in his eye), I'm still surprised it hasn't ended up with a certain V8 in it  Maybe that's going to 'accidentally' fall in one day before it's finished?  hee hee.

Scoot, which spec cam are you going to run with the new head? The same one that's currently on the car? Last time I talked to you, you had another one which was a bit lumpy for your current setup, but you still had it still sitting around. 

[Gareth. J.]

What sort of work did the head have done and what comp ratio do you expect?

[Scoota G]

This has the details of the head mods.

http://www.viczcar.com/forum/index.php/topic,6905.0.html

As for the compression ratio, it was bolted to a L28 with flat tops so on an L26 with dished i expect it to be streetable. I just want a little more than i have (ever heard that before).

[Scoota G]

All assembled now and i ordered camtower shims From Stewart Wilkins, i think it will just sit there now until i rework the engine bay although i can just feel i'll get tempted one of these weekends.
I also think one of those twin idler gear http://www.kameariusa.com/L6_Twin_Idler_Gear.php would be a good addition. I found one on another site $200 cheaper.

But for now i think i'll go buy some more paint and reskin the Passenger side door as the weather is starting to improve.

[dalee]

weather is starting to improve.

Yes, with wind chill factor, it finally reached 0 degrees at 5.30pm on Wednesday.  Time to break out the sunscreen. 

[Scoota G]

Yes, with wind chill factor, it finally reached 0 degrees at 5.30pm on Wednesday.  Time to break out the sunscreen. 

Hey, enough of your lip you steel wrangling, Big W, shelf pincher! 

[Zedman240]

There there now...its freakin cold everywhere in this great state of ours! Bring on the 18' weather!!!!

[Scoota G]

Awesome goodies, what sort of head gasket is that?

I bought another full set, ACL.

[Scoota G]

Well after an Awsome weekend Helping rob (fuzzydropbear) out with his project and a Full On trip down to Phillip Island the car needed a bit of a wash. Also the pile of parts that need to be fitted grows ever larger with a Dash that i picked up off Peter when down at Phillip Island (with a working clock) and a set of camshaft tower shims that completes the list of everything that i need to install the cylinder head. Happy Days indeed.

I swear everytime i walk even close to my car with a Parcel it's almost as if the front changes from it's current look to something that says "For Mee"

[luvemfast]

Oh that dash sure is purty
What size shims are they? Why are you using them?

[Scoota G]

The shims are 1mm and i'm using them because the new Cylinder Head is shaved, i think the dash is awful nice too. We'll see tomorrow.

[Scoota G]

Due to the rain i've been working on Oscar this week. The dash has been removed and then i removed the dash cap. I think the photos speak for themselves

[Scoota G]

... I just can't help but post a photo of the L26 every now and then 

[GV260]

So what are the spec's of the L26 and have you had it on a dyno?