240z front turn signal housing

[theguppies]

I'm looking for just the housing, does not need to have lens.

[scoot3r42]

what side is it the same as a 260? if so i should have

[Zedman240]

260Z housings have provisions for 2 globes whereas 240Z have only one for the combined parker/indicator. Do you need both sides, left or right hand?

[RB30X]

You going to make yellow lenses for these soon or just the clears?

[theguppies]

i'm not making anything. i just want the housing for my clear lens. i like the one with 2 light bulb in 1 housing. just hoping someone has one laying around.

[Zedman240]

Scoot3r42 has several housings...which side do you need? Send him a PM..

[theguppies]

Thanks Zedman240! i'm going to email him

[theguppies]

ahh, someone got to have one laying around. no luck so far

[Zedsabbath]

Do they have a parallel rubber gasket or a tapered one...I've got one spare body of the parallel gasket type, it has a small bulb...and I have one body of the tapered gasket type with a bayonet fitting but it's rusted through along one edge

[Zedsabbath]

Sorry...thinking of the wrong light housing 

[theguppies]

still searching for one

[dazzed]

not all 240z are the same differs to the year , they are not all clear , or amber at that some have both park and indicator separated in the same housing which is much better depends on the year and to the month of build date, but then it dosnt matter as long as they are the same

[Brabham]

Which side were you after? That is most important

[Brabham]

Also if you fill in your location we can direct you to the closest Z parts depository. Cheers.

[Brabham]

If you are after the one with 2 light bulbs it may not be compatible with the 240Z wiring loom since the 240Z only had one light bulb. Connectors could be different as well? You may want to check this. Cheers.