Author Topic: Sirpent "Z"  (Read 88743 times)

Offline Lightmaster240z

  • Donating Member
  • Registered User
  • ***
  • Posts: 1364
  • Location: Traralgon
  • I don't know what I am Doing now HELP
Re: Sirpent "Z"
« Reply #750 on: November 27, 2011, 08:43:17 PM »
Nice to see you have new wheels but now you have to get to work.  ;). Do they let you down my way in this new fancy job you have? If not I will see you on the week end 
regards
Bruce
The man to see for your lighting neededs

Offline Sirpent

  • Donating Member
  • Registered User
  • ***
  • Posts: 1916
  • Location: Sodom & Gomorrah - Melbourne
  • John.O.
    • Sirpent Zed
Re: Sirpent "Z"
« Reply #751 on: November 29, 2011, 05:42:49 PM »
Yes, I think you've missed out on about 5 pages worth of updates since you've started this new job Johnno.
I've found heaps more time in my breaks at work  :P

Good to see my absence has helped you get over you addiction Simon, your family must be enjoying the extra quality time you can afford them and your boss your career.

Nice to see you have new wheels but now you have to get to work.  ;). Do they let you down my way in this new fancy job you have? If not I will see you on the week end 

As a matter of fact, I have to get down to meet some ppl at Loy Yang soon so I will be sure to grab your address on Saturday so I can stop in when down there Bruce.
regards
Bruce
RS30 #005067 Restoration

"Das Drehkraftmonster RS32 AMG"

Full pictorial at

http://www.facebook.com/sirpentz

Offline Sirpent

  • Donating Member
  • Registered User
  • ***
  • Posts: 1916
  • Location: Sodom & Gomorrah - Melbourne
  • John.O.
    • Sirpent Zed
Re: Sirpent "Z"
« Reply #752 on: April 19, 2012, 10:51:03 AM »
Greetings

Just a quick hello, I'm sure my absense has been greatly apreciated by some  ;)

Thanks to the many PVT messages, all is well, and I should be out of the asylum shortly and back onto the "Z" away from this insanity at work., thats if the specialists give the all clear.

Cheers

John
RS30 #005067 Restoration

"Das Drehkraftmonster RS32 AMG"

Full pictorial at

http://www.facebook.com/sirpentz

Offline zzzzed

  • mick the zed freek
  • Registered User
  • *
  • Posts: 2284
  • Location: south australia
Re: Sirpent "Z"
« Reply #753 on: April 19, 2012, 03:19:52 PM »
Ohh eyyyyy!!  ;D
You see things and you say why? I dream things that never were, and I say why not.  (Edited so lurch can understand it)


240z
260z 2 seater
Yamaha cafe racer
Gu pootrol tow car and daily driver 
More to come

Offline Lightmaster240z

  • Donating Member
  • Registered User
  • ***
  • Posts: 1364
  • Location: Traralgon
  • I don't know what I am Doing now HELP
Re: Sirpent "Z"
« Reply #754 on: April 19, 2012, 05:08:57 PM »
Here's Johnny ??? he's back for who know where :)
The man to see for your lighting neededs

Offline luvemfast

  • Simon
  • Donating Member
  • Registered User
  • ***
  • Posts: 3724
  • Location: Melbourne
Re: Sirpent "Z"
« Reply #755 on: April 19, 2012, 06:40:06 PM »
Well well well
Look who stuck there head up?
Project firing up again soon Johnno?

Offline MaygZ

  • Registered User
  • *
  • Posts: 1382
  • Location: Springfield, Victoria
  • We all started somewhere. Where are you Lurch???
    • Build Thread
Re: Sirpent "Z"
« Reply #756 on: April 19, 2012, 06:42:24 PM »
Change his name from the Sirpent to the Phoenix.

Welcome back.  I've missed your colourful stories from the 80's   ;D
Zeds are more fun than women!!   You know I'm right, but you're too scared to admit it!!

http://www.viczcar.com/forum/index.php/topic,7841.0.html

Offline Sirpent

  • Donating Member
  • Registered User
  • ***
  • Posts: 1916
  • Location: Sodom & Gomorrah - Melbourne
  • John.O.
    • Sirpent Zed
Re: Sirpent "Z"
« Reply #757 on: April 20, 2012, 10:47:18 AM »
Nice to see you 4 old farts, I mean members are still about, so many new and interesting members I see about the place.

Yes, the Tax man commeth and he will be opening up his kitty in July to pay back some hard earned "Drakmar's" then I can put some towards the old girl.

But I have made myself a promise, no more updates unless something actually physically manifests, more interesting that way.

Cheers boys ;)
RS30 #005067 Restoration

"Das Drehkraftmonster RS32 AMG"

Full pictorial at

http://www.facebook.com/sirpentz

Offline RB30X

  • Donating Member
  • Registered User
  • ***
  • Posts: 1979
  • Location: Gladstone QLD
Re: Sirpent "Z"
« Reply #758 on: April 20, 2012, 12:57:19 PM »
But I have made myself a promise, no more updates unless something actually physically manifests, more interesting that way.
Cheers boys ;)

Tell me about it, I keep clicking on this expecting to hear it running  ;)

Offline MaygZ

  • Registered User
  • *
  • Posts: 1382
  • Location: Springfield, Victoria
  • We all started somewhere. Where are you Lurch???
    • Build Thread
Re: Sirpent "Z"
« Reply #759 on: April 20, 2012, 10:01:58 PM »
Tell me about it, I keep clicking on this expecting to hear it running  ;)

At page 51 - he should have finished his 3rd one by now!!   :-X
Zeds are more fun than women!!   You know I'm right, but you're too scared to admit it!!

http://www.viczcar.com/forum/index.php/topic,7841.0.html

Offline luvemfast

  • Simon
  • Donating Member
  • Registered User
  • ***
  • Posts: 3724
  • Location: Melbourne
Re: Sirpent "Z"
« Reply #760 on: April 21, 2012, 06:38:41 AM »
At page 51 - he should have finished his 3rd one by now!!   :-X
Bah ha ha ha
It's funny cos it's true  ;D

Offline NZeder

  • Registered User
  • *
  • Posts: 2200
  • Location: Auckland, NZ
    • http://nzeder.net
Re: Sirpent "Z"
« Reply #761 on: April 24, 2012, 05:28:49 AM »
John, good to see you will soon be back on the task. I wish I could say the same :(

Still keen to see what you do re Windows regulators - as you might recall my new 74 260z project I purchased was missing the window regulators, I do have some 240z regulators but they are slightly different + the cage cross bars are in the way of the crank handle. So I am dead keen to see what you do given your 2 seater is the same shell ;) aka same doors - so I can copy what you do :)

Mike

76 RS30 260z 改RB26 N/A 霞
Previous
70 HS30-00016 240z
72 HS30 240z L型 2.8
71 HS30 240z L型改3.2
79 HS130 280zx
82 HS130 280zx T top
2x 73 KP710 160JSSS
74 KB210 120Y Coupe
71 510 1600 Deluxe

Offline Sirpent

  • Donating Member
  • Registered User
  • ***
  • Posts: 1916
  • Location: Sodom & Gomorrah - Melbourne
  • John.O.
    • Sirpent Zed
Re: Sirpent "Z"
« Reply #762 on: May 24, 2012, 05:26:44 PM »
Just in case you all thought I was dead..............

Almost was..................

But extracting 34mm's of pure agony a day ago has dragged me back from a 4 week pain killer induced twilight zone.

See you all back on here post July 1st some time when the ATO send the project funding cheque  ;)
RS30 #005067 Restoration

"Das Drehkraftmonster RS32 AMG"

Full pictorial at

http://www.facebook.com/sirpentz

Offline luvemfast

  • Simon
  • Donating Member
  • Registered User
  • ***
  • Posts: 3724
  • Location: Melbourne
Re: Sirpent "Z"
« Reply #763 on: May 24, 2012, 06:20:35 PM »
What the hell is that Johhno?

Been a while since you've popped in here.
Bit like pulling teeth  :o

Offline Sirpent

  • Donating Member
  • Registered User
  • ***
  • Posts: 1916
  • Location: Sodom & Gomorrah - Melbourne
  • John.O.
    • Sirpent Zed
Re: Sirpent "Z"
« Reply #764 on: May 24, 2012, 06:25:49 PM »
Thats a twisted upper rear molar which was impacted by a wisdom tooth, it had to be surgically removed, thought Id bring it to show and tell.

RS30 #005067 Restoration

"Das Drehkraftmonster RS32 AMG"

Full pictorial at

http://www.facebook.com/sirpentz

Auszcar 240z, 260z, 280zx Forums

Re: Sirpent "Z"
« Reply #764 on: May 24, 2012, 06:25:49 PM »